LumberJocks

Thien separator

  • Advertise with us
Project by Klusy posted 03-14-2017 09:26 PM 690 views 0 times favorited 4 comments Add to Favorites Watch

To better removing sawdust, I made Thien separator.The function is good, but I would say that you need a larger barrel.Even after the evacuation of all dust after work constantly at the top of the barrel Mota filings.

-- Antonín,Rožná.Česká republika





4 comments so far

View woodchuckerNJ's profile

woodchuckerNJ

1218 posts in 1295 days


#1 posted 03-14-2017 10:01 PM

That’s not correctly made. The output needs to be in the center. and the baffle much closer to the elbow. It should be up against it. You probably get very little in the can, and most goes back to the DC.

-- Jeff NJ

View Klusy's profile

Klusy

41 posts in 1249 days


#2 posted 03-14-2017 11:44 PM

It’s not in the middle, because both ends of the knees.I had done this one on the exhaust fan, as I have tried, if it is not better.Now I have a separator well done, because I have to get a more powerful engine.suction trpartition is also because I did the rest, and there were holes.ap me lost power.I did not think it would have much effect.

-- Antonín,Rožná.Česká republika

View woodbutcherbynight's profile

woodbutcherbynight

3044 posts in 2070 days


#3 posted 03-15-2017 03:42 AM

Вы говорите по-русски? Если да, отправьте мне личное сообщение о том, как Вы делали свой проект. Может, я смогу помочь.

Иногда перевод на английский усложняет (запутывает) понимание того, как что-то сделано.

-- Live to tell the stories, they sound better that way.

View Klusy's profile

Klusy

41 posts in 1249 days


#4 posted 03-15-2017 11:13 PM



That s not correctly made. The output needs to be in the center. and the baffle much closer to the elbow. It should be up against it. You probably get very little in the can, and most goes back to the DC.

- woodchuckerNJ


It’s not in the middle, because both ends of the knees.I had done this one on the exhaust fan, as I have tried, if it is not better.Now I have a separator well done, because I have to get a more powerful engine.suction trpartition is also because I did the rest, and there were holes.ap me lost power.I did not think it would have much effect.

-- Antonín,Rožná.Česká republika

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com