|Project by jeffthewoodwacker||posted 04-06-2010 01:44 AM||1127 views||2 times favorited||6 comments|
This is a natural bark edge open form turned from a piece of hackberry. Eight inches high and 10 inches in diameter at it’s widest point. There is some open air on one side where I dug an old indian arrowhead out of the piece before I turned it. This area now looks like a seahorse, at least that is what I was told – never argue with a paying customer! Finish is wipe on satin poly followed by all three steps on the Beall buffing wheel.
-- Those that say it can't be done should not interrupt those who are doing it.