LumberJocks

Puzzle pieces

  • Advertise with us
Project by Ace75 posted 02-21-2017 09:16 AM 957 views 2 times favorited 10 comments Add to Favorites Watch
Puzzle pieces
Puzzle pieces No picture No picture No picture No picture No picture
Zoom Pictures

Over the weekend I was able to complete a couple more dining table puzzle displays…can be used as hot pot trivet fir a large meals or if your hosting a wine tasting party can be used as small charcuterie plates that hold your wine glass as you mix and mingle. Follow me on Instagram @dugas.aaron





10 comments so far

View becikeja's profile

becikeja

721 posts in 2387 days


#1 posted 02-21-2017 12:43 PM

Cool, are they cut all the way through?

-- Don't outsmart your common sense

View a1Jim's profile

a1Jim

115614 posts in 3151 days


#2 posted 02-21-2017 01:22 PM

very interesting idea plus a well-executed build and choice of woods.

-- http://artisticwoodstudio.com Custom furniture

View Tennessee's profile

Tennessee

2481 posts in 2089 days


#3 posted 02-21-2017 01:26 PM

Curious if you cut these into the puzzle pieces with a scroll saw, or do you use a bandsaw with say, a 1/8” blade?
Not sure I could make myself cut up a perfectly good cutting board into pieces, since one mistake and you’re done!

BTW, they look really great!

-- Paul, Tennessee, http://www.tsunamiguitars.com

View Ace75's profile

Ace75

16 posts in 539 days


#4 posted 02-21-2017 01:46 PM

1st attemp was bandsaw and scroll saw but left pieces to sloppy…2nd attempt was have a laser cut template and used router and template bite due to gain direction changes had lots of blow out….3rd attempt was cnc but after sanding machine marks out pieces were sloppy..4th was over size on cnc and sand to snug fit ..you pick the whole thing up like regular cutting board now.

The actual blank to make these was twice as long in order to get the pattern to match and stay consistent. The scraps are being turned into set of coasters…took 4 months off and on to perfect this to be what you see.

View helluvawreck's profile

helluvawreck

24826 posts in 2441 days


#5 posted 02-21-2017 04:06 PM

These are so beautiful and nicely done.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View SteveGaskins's profile

SteveGaskins

698 posts in 2161 days


#6 posted 02-21-2017 11:08 PM

Great idea and looks great, too.

-- Steve, South Carolina, http://www.finewoodworkingofsc.com

View Hawaiilad's profile

Hawaiilad

2975 posts in 2595 days


#7 posted 02-22-2017 02:54 AM

Great idea. I wonder if you cut the boards on the scroll saw with the table slanted to one side it would keep the pieces from falling apart when you pick it up?

-- Larry in Hawaii,

View Ace75's profile

Ace75

16 posts in 539 days


#8 posted 02-22-2017 03:01 AM

the pictures post are fit pretty snug. you can pick these two boards up as one piece without falling apart. It does have a slight sag in the Middle but stays together…i would run a marathon with it this way though :-)

View pmayer's profile

pmayer

936 posts in 2640 days


#9 posted 02-22-2017 12:50 PM

these look very cool!

-- PaulMayer, http://www.vernswoodgoods.com

View majuvla's profile

majuvla

9915 posts in 2442 days


#10 posted 02-23-2017 09:45 AM

Very beautiful pettern and idea with puzzles.

-- Ivan, Croatia, Wooddicted

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com