LumberJocks

Under saw cabinet and outfeed table.

  • Advertise with us
Project by bondogaposis posted 02-21-2017 04:12 AM 1781 views 8 times favorited 7 comments Add to Favorites Watch

I picked up a Unisaw back in October. I sold my old Craftsman saw and my really handy under saw cabinet with it. The Unisaw has no storage, so I really needed some storage for saw blades and miscellaneous saw accessories that I have accumulated in my lifetime. I wanted it all to be right there within reach of the saw. So I built this cabinet on wheels so it could be easily moved with the saw that is on a mobile base as well. Then I needed an outfeed table, it too is on casters so I can move it forward or back too accommodate ripping longer stock. I built lots of storage into it as well as I didn’t want to have wasted space under a table like my old outfeed table. The under saw cabinet has 7 drawers and 2 cubbies. The out feed table has 6 drawers and 3 cabinets and on the opposite side it has 2 open cubbies with shelves. This has been a huge addition to my shop and has greatly increased the productivity at the saw. The materials are mostly leftovers from other jobs that I had laying around. I put plastic laminate on the tops. My local Lowe’s had a sheet that had damaged edges that was marked way down so I snapped it up. Thanks for looking.

-- Bondo Gaposis





7 comments so far

View ralbuck's profile

ralbuck

3499 posts in 2044 days


#1 posted 02-21-2017 06:16 AM

Great storage.I see 2 different cabinets; one below and one level that works as an extra stability for the sawn material base too.

-- SAWDUST is THERAPY without a couch! just rjR

View AndyPickler's profile

AndyPickler

7 posts in 1152 days


#2 posted 02-21-2017 11:46 AM

Outstanding. I recently upgraded from a contractor’s saw for which I had built the Wood Magazine workstation and now I have a SawStop (nothing but the saw right now). I definitely have felt the need both for an outfeed table and especially the under saw cabinet. Right now my blades and other table saw tools are just sitting on the floor right where your cabinet it.

View david38's profile

david38

3518 posts in 2121 days


#3 posted 02-21-2017 04:47 PM

nice build

View dannmarks's profile

dannmarks

305 posts in 360 days


#4 posted 02-21-2017 05:15 PM

Wonderful sir.

View oldrivers's profile

oldrivers

1165 posts in 1345 days


#5 posted 02-21-2017 08:11 PM

Very good build, looks great, plenty of storage and mobile,the out feed is on by list and looks like you nailed it congratulations.

-- Soli Deo gloria!

View grantd's profile

grantd

86 posts in 1261 days


#6 posted 02-22-2017 01:54 AM

Looks great

View Easterlake's profile

Easterlake

19 posts in 301 days


#7 posted 02-23-2017 05:41 AM

Very nice. I wanted my bench/cabinet to double as an out feed table but I’m 6’7” and needed the extra height on by bench.

-- Life is hard; It's even harder if you're stupid. - John Wayne

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com