LumberJocks

Wooden Bowls

  • Advertise with us
Project by nayo posted 02-20-2017 01:56 AM 614 views 0 times favorited 11 comments Add to Favorites Watch

i was commissioned to make 8 big bowl for some organization that deals with agriculture and forests, they had a group visiting from UK and wanted to make them a gift, inside this bowl they would put ground pepper seeds as that is one of the crops that they are helping produce.

initally they were supposed to be 8 in diameter an 4 inches high. But i messed up when i was cutting the blanks, i tried to cut the angle in the band saw but i miss the first one by one inch, then i tried cut them in the table saw and did the same, i was trying to save a little bit of turning.
anyway, some are smaller than others, luckily the client say it was ok and that they were very nice.

i finished them with a mixture of mineral oil and bees wax.

here is me sanding one of them.





11 comments so far

View ralbuck's profile

ralbuck

5096 posts in 2407 days


#1 posted 02-20-2017 03:02 AM

This project just “bowls” me over—super neat!

Yes, I know—-bad pun.

-- Wood rescue is good for the environment and me! just rjR

View CFrye's profile

CFrye

10418 posts in 1981 days


#2 posted 02-20-2017 03:38 AM

Beautiful bowls, Nayo! What kind of wood is it? The finish really brought out the grain! A machine could have made them the same. You made them special.

-- God bless, Candy

View jeff's profile

jeff

1103 posts in 3606 days


#3 posted 02-20-2017 07:49 AM

Nice set of bowls.

-- Jeff,Tucson,Az.

View Tooch's profile

Tooch

1777 posts in 2017 days


#4 posted 02-20-2017 01:23 PM

those are really nice! What type of wood is that?

-- "Well, the world needs ditch-diggers too..." - Judge Smails

View helluvawreck's profile

helluvawreck

32083 posts in 3008 days


#5 posted 02-20-2017 03:58 PM

These are very nice bowls.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View Roger's profile

Roger

20948 posts in 2945 days


#6 posted 02-20-2017 03:59 PM

Ahh, ice cream for everyone… All super nice Nayo

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com

View JollyGreen67's profile

JollyGreen67

1676 posts in 2904 days


#7 posted 02-20-2017 06:09 PM

Beautiful Nayo. The lathe you are using is very interesting. By reading your bio it looks like it is home made.

-- When I was a kid I wanted to be older . . . . . this CRAP is not what I expected ! RIP 09/08/2018

View nayo's profile

nayo

294 posts in 2034 days


#8 posted 02-21-2017 02:07 AM

ups!, forgot to mention, it is mahogany


Beautiful bowls, Nayo! What kind of wood is it? The finish really brought out the grain! A machine could have made them the same. You made them special.

- CFrye


View John's profile

John

1231 posts in 1411 days


#9 posted 02-21-2017 02:10 AM

That’s a nice light brown colour. I like the shape too.

-- John, Sunshine Coast, BC, Canada.

View nayo's profile

nayo

294 posts in 2034 days


#10 posted 02-21-2017 02:30 AM

Mahogany


those are really nice! What type of wood is that?

- Tooch


View nayo's profile

nayo

294 posts in 2034 days


#11 posted 02-21-2017 02:50 AM

Yes, it is homemade.
was done by 2 uncles of mine that run a milling-welding-machining shop. they are quite inventive.
the jaw is one from a metal lathe that they welded a ring (a querter of it) of metal so i could grab the bowls.
the thing is quite big, i have made 16 inches bowl in that one, i have to make a wooden pulley because it was too fast, and it only have one speed.
sorry about the mess. i should have cleaned it a bit!


Beautiful Nayo. The lathe you are using is very interesting. By reading your bio it looks like it is home made.

- Jimbo4


Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com