LumberJocks

Patio Table

  • Advertise with us
Project by shaun posted 10-12-2007 03:32 AM 2030 views 4 times favorited 16 comments Add to Favorites Watch

I had to sand it down and spray the top again, left a fan running with the last coat of urathane drying, DOH!

Details are in my Patio Table blog.

-- I've cut that board three times and it's still too short!





16 comments so far

View Max's profile

Max

55993 posts in 3543 days


#1 posted 10-12-2007 04:34 AM

That turned out very nice….

-- Max "Desperado", Salt Lake City, UT

View WayneC's profile

WayneC

12642 posts in 3367 days


#2 posted 10-12-2007 04:49 AM

Great table. Very nice design.

-- We must guard our enthusiasm as we would our life - James Krenov

View oscorner's profile

oscorner

4564 posts in 3581 days


#3 posted 10-12-2007 01:04 PM

Nice looking finish. Have you started on those chairs and planters, yet?

-- Jesus is Lord!

View herbr's profile

herbr

141 posts in 3339 days


#4 posted 10-12-2007 02:51 PM

Great table and unique design!

-- Spread love with our work

View TomFran's profile

TomFran

2952 posts in 3264 days


#5 posted 10-12-2007 05:40 PM

Beautiful design and craftsmanship.

-- Tom, Surfside Beach, SC - Romans 8:28

View Dadoo's profile

Dadoo

1788 posts in 3261 days


#6 posted 10-12-2007 05:53 PM

Yeah I like it too.

-- Bob Vila would be so proud of you!

View schroeder's profile

schroeder

702 posts in 3395 days


#7 posted 10-12-2007 11:21 PM

Beautiful!

-- The Gnarly Wood Shoppe

View Napaman's profile

Napaman

5488 posts in 3347 days


#8 posted 10-13-2007 03:08 AM

love the shine…

-- Matt--Proud LJ since 2007

View lance's profile

lance

170 posts in 3258 days


#9 posted 10-13-2007 03:49 PM

That table is way to nice to leave outside. Really beautiful work.

-- Bob Lance, DE

View Todd A. Clippinger's profile

Todd A. Clippinger

8900 posts in 3370 days


#10 posted 11-05-2007 05:18 AM

Nice work!

-- Todd A. Clippinger, Montana, http://americancraftsmanworkshop.com

View Karson's profile

Karson

35023 posts in 3671 days


#11 posted 11-05-2007 05:35 AM

Great looking table.

-- I've been blessed with a father who liked to tinker in wood, and a wife who lets me tinker in wood. Southern Delaware soon moving to Virginia karsonwm@gmail.com †

View Dorje's profile

Dorje

1763 posts in 3267 days


#12 posted 11-05-2007 08:09 AM

Aha! This is the table you referred to somewhere at some point! I’m glad to have seen it – great work! I’ll have to go over blog at some point!

-- Dorje (pronounced "door-jay"), Seattle, WA

View mrtrim's profile

mrtrim

1696 posts in 3150 days


#13 posted 12-04-2007 02:15 PM

hey there shaun love your table ! great work . i wondered how i missed it then i noticed it was posted the very day i found this site ! i didnt do much other than spectate for a few days here , wanted to see if it was just another group of know it alls and my way is the only way type people that i had seen at other sites .anyway glad i found it . again you did a great job on your table verne

View Bruce's profile

Bruce

192 posts in 3045 days


#14 posted 01-27-2008 06:27 PM

Great table. Do you have a measured drawing, I’d like to build one. Is that cedar you used?

-- I think of Jack Nicholson as the Joker in Batman when he says "Where does he get those wonderful toys" and ask WHERE DO U GUYS GET ALL THAT WONDERFUL WOOD?

View shaun's profile

shaun

360 posts in 3176 days


#15 posted 01-28-2008 12:12 AM

Thanks for the compliment Bruce. I did do a drawing for the top but the rest I just sort of made up as I went along.

I did blog the construction of the whole thing though, here’s a link to the blog.

I’ll send you a message so we can figure out a way to get that drawing to you. You’re right about the wood, it’s Western Red Cedar finished with System 3 Spar Varnish.

-- I've cut that board three times and it's still too short!

showing 1 through 15 of 16 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com