LumberJocks

GarageworX CNC Cart

  • Advertise with us
Project by Mike Merzke posted 02-08-2017 12:48 AM 1761 views 3 times favorited 10 comments Add to Favorites Watch

When I upgraded to the GarageworX CNC I had to build a larger cart for it and at the same time maximize the use of the space. This is the design that I came up with. It takes up a roughly 56” x 56” area and the front has a bank of 6 drawers for storage and the back of the cart is a vented area for the shop vac and chip separator that provides dust collection for my CNC. Of course what shop furniture isn’t complete with a little oak trim.

-- Mike Merzke, https://www.merzkecustomwoodworking.com





10 comments so far

View woodbutcherbynight's profile

woodbutcherbynight

3056 posts in 2072 days


#1 posted 02-08-2017 02:14 AM

Nice work on the cart, would like to have a CNC in the shop myself.

-- Live to tell the stories, they sound better that way.

View Mike Merzke's profile

Mike Merzke

183 posts in 1826 days


#2 posted 02-08-2017 02:27 AM

Thanks, it is a really nice to tool to have. I like to call it my little helper since it can be working on one thing while I work on another.

-- Mike Merzke, https://www.merzkecustomwoodworking.com

View woodbutcherbynight's profile

woodbutcherbynight

3056 posts in 2072 days


#3 posted 02-08-2017 05:23 AM

My Dad says that is what kids are for, or so he thought once…... LOL

-- Live to tell the stories, they sound better that way.

View Kelster58's profile

Kelster58

285 posts in 203 days


#4 posted 02-08-2017 10:50 AM

Wow, very nice. I hope to get a CNC some day. You did a great job there.

-- K. Stone “Tell me and I forget, teach me and I may remember, involve me and I learn.” ― Benjamin Franklin

View Mainiac Matt 's profile

Mainiac Matt

6791 posts in 1991 days


#5 posted 02-08-2017 02:35 PM

Great way to make good use of the space.

-- Pine is fine, but Oak's no joke!

View dannmarks's profile

dannmarks

252 posts in 244 days


#6 posted 02-08-2017 05:51 PM

Do you have a review on this machine yet? I would love to know more.

View helluvawreck's profile

helluvawreck

26341 posts in 2529 days


#7 posted 02-08-2017 07:01 PM

That’s a nice looking CNC and that base turned out beautifully. Congratulations.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View Brandonbozo's profile

Brandonbozo

21 posts in 2346 days


#8 posted 02-08-2017 11:04 PM

That cart turned out really nice. I have been looking at getting a stepcraft CNC. Would love you to review your garageworx one, had never herd of that brand until now, guess I have some research to do now lol.

View Mike Merzke's profile

Mike Merzke

183 posts in 1826 days


#9 posted 02-08-2017 11:29 PM

I haven’t done a review yet but will probably be doing on soon since I’ve had plenty of time to run it through its paces. This is also my third CNC that I’ve had in my shop so each one has been a progression and improvement on the last. This one is here to stay!

-- Mike Merzke, https://www.merzkecustomwoodworking.com

View Roger's profile

Roger

20754 posts in 2467 days


#10 posted 02-18-2017 11:52 PM

Very nice.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com