|Project by wrenchhead||posted 03-20-2010 07:20 PM||1938 views||5 times favorited||9 comments|
This was another project for my wife’s salon. I made it out of the cheapest pine you can get at the big box store. I took a lot of work to get the wood to look good. I used a sanding sealer not thinned. After I sanded that smooth I used general finishes honey maple oil stain and then three coats of wipe on poly. This was my first attempt at an inset door with mortised hinges. The gap is not perfect but I am the only one that will ever see the imperfection.
Thanks for looking
-- I could quit if I wanted