LumberJocks

The Best combined sled for Table Saw/Improved

  • Advertise with us
Project by Bengalahill posted 02-01-2017 02:54 PM 6711 views 15 times favorited 2 comments Add to Favorites Watch

”Do not miss the video of this project”:https://www.youtube.com/watch?v=EbWtwt7NG7U

I present the following work on this sliding guide for various cuts. You may be familiar with another that I did some time … it turns out that I had a small accident with her, which thanks to God I did not pass anything, but the same was badly stopped, and that’s what I had to do Another similar, yes, with some modifications and improvements.
With this guide, like the previous one I did, we can cut both at 45º and 90º, lateral cut and also with this the known cut of die,( finger cut box joint)tooth or loop as it is said here. Also with this I do not need to remove the wedge, as I was with the other each time I had to use it, and so when not holding well the table I was cutting I got up, I made a step back and it was To give me in the whole face … but as I told you, nothing happened to me.
UNTIL NEXT TIME…

-- Bengala Hill - http://www.youtube.com/c/BengalaHill





2 comments so far

View usmcdeerhunter's profile

usmcdeerhunter

28 posts in 753 days


#1 posted 02-01-2017 08:56 PM

Like the idea for the stop block I’m going to try something like that for my sled

View Carloz's profile

Carloz

773 posts in 376 days


#2 posted 02-02-2017 05:42 PM

Nice sled, however calling it the best is a stretch.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com