Jig saw on table

  • Advertise with us
Project by baxgas posted 01-30-2017 02:05 PM 2005 views 4 times favorited 4 comments Add to Favorites Watch

Hello. This is my first presentation and is a reversed jig saw with 13 cm blade. I searched many designs and i came up with this hoping that i could help somebody else with his way…

4 comments so far

View htl's profile


4229 posts in 1356 days

#1 posted 01-30-2017 07:55 PM

Very interesting project!
Is the wing nut used for a quick release for the guide so you can set the wood in for a cut in the middle of a board?

-- An Index Of My Model making Blogs

View Steve Preslar's profile

Steve Preslar

201 posts in 732 days

#2 posted 01-30-2017 09:10 PM

Great build!

-- Live, lathe, and prosper. - William Gwin

View SteveMI's profile


1123 posts in 3491 days

#3 posted 01-31-2017 12:15 AM

What was your thought for building it, I figure there was something that no other tool in you shop could meet your need. Like to see some of the things you use it for.

I have a scroll saw and band saw, but there is some space between the two that neither are best at.


View baxgas's profile


2 posts in 680 days

#4 posted 02-01-2017 12:00 AM

I use the wing nut to set the height of the wood to be cutted. I wish i had a band and scroll saw but as you see i am settled for now with just a cheap jigsaw. Thanks for the comments, and please be patient with my poor english.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics