|Project by Brian024||posted 03-14-2010 02:58 AM||6134 views||16 times favorited||5 comments|
Here is my latest completed project, a table saw workstation. I’ve been planning on building one for a while but never had the time to sit down and figure out how I wanted to do it. Before I built this, the saw was on a real weak aluminum stand that let the saw rock and move when you were cutting really heavy pieces, cutting a full sheet of ply wasn’t even a thought. I ended up on a design that was compact, able to fit in my crammed shop, and easily moved. I didn’t want it to cost a ton of money so I used 2×4’s and some b/c grad plywood. It measures 40” wide by 48” long. I did build a dust shoot under the saw which actually works better that what the saw originally had which was just a bag underneath. The out feed table is about 2’ wide so I’ve got plenty of support compared to what I used to have.