LumberJocks

WORK TABLE SCREW

  • Advertise with us
Project by Bengalahill posted 01-21-2017 03:34 PM 1246 views 0 times favorited 5 comments Add to Favorites Watch

If you want to see its construction in more detail visit my channel: http://www.youtube.com/c/BengalaHill.
Thanks.

-- Bengala Hill - http://www.youtube.com/c/BengalaHill





5 comments so far

View helluvawreck's profile

helluvawreck

29158 posts in 2703 days


#1 posted 01-21-2017 06:53 PM

You are doing a really nice job on this. Congratulations.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View woodchuckerNJ's profile

woodchuckerNJ

1244 posts in 1471 days


#2 posted 01-21-2017 09:01 PM

why the hell would you put the screw forward where you need to spin it, and probably will walk into it.
My opinion.. it’s not well designed.

-- Jeff NJ

View DanK's profile

DanK

23 posts in 2504 days


#3 posted 01-21-2017 10:12 PM

I agree. It shouldn’t be too much work to epoxy the bolts/threaded rods into the handwheels. Makes my nuckles hurt just looking at the pictures. I would also consider adding some braces between the back jaw and the base for extra stability. That being said, yours is much nicer than mine, made from some 2×6 scraps screwed together.

View Bengalahill's profile

Bengalahill

18 posts in 454 days


#4 posted 01-21-2017 10:23 PM

woodchukerNJ, Do not be lazy, use this screw and you’ll see how good you are … you can also put it and remove it from your bank in a moment.

Thanks for seeing the images and I do not know if you have also seen the video, if so, I am sorry that you did not like the design … we do not always like them all.

-- Bengala Hill - http://www.youtube.com/c/BengalaHill

View Bengalahill's profile

Bengalahill

18 posts in 454 days


#5 posted 01-21-2017 10:24 PM



I agree. It shouldn t be too much work to epoxy the bolts/threaded rods into the handwheels. Makes my nuckles hurt just looking at the pictures. I would also consider adding some braces between the back jaw and the base for extra stability. That being said, yours is much nicer than mine, made from some 2×6 scraps screwed together.

- DanK


Thanks Dank

-- Bengala Hill - http://www.youtube.com/c/BengalaHill

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com