|Project by seandietrich||posted 03-12-2010 04:56 AM||2158 views||6 times favorited||2 comments|
Needed new a marking gauge, and a mortise marking gauge, so I set out to build some out of scrap for a job that needed them.
Scrap oak was used, and these were made using only hand tools. The screws were just old bolts that I had laying around. I ground a nail to a sharp point before driving it into the marking end. These work very nicely.
-- "Unless workmanship comes to be understood and appreciated for the art it is, our environment will lose much of the quality it still retains." -- David Pye