LumberJocks

So many Pallets

  • Advertise with us
Project by CClark86 posted 01-10-2017 06:05 PM 1347 views 11 times favorited 13 comments Add to Favorites Watch

I’ve posted some of these on here before when I was messing around with them, now I make them quite often. These are the pallet coasters and pallet trivets I make on a regular basis.

Made from scrap wood / cut offs of Oak and Walnut. Assembled piece by piece using just glue then (sometimes) painted using a USA-outline I had made and then varnished on top for protection. Breaking down the scraps into the component parts is very time consuming, I have actually grown fond of the hours of gluing it takes to make a batch of 500+.

I also combine the pallets and trivets as ‘gift sets’

Cheers,

-Chris

-- Hobbyist Homebrewer, Woodworker, Glider Pilot. But only ever two at the same time.





13 comments so far

View sherm54's profile

sherm54

30 posts in 206 days


#1 posted 01-10-2017 06:23 PM

These are cool! I may have to try something like this.

View Sheisserick's profile

Sheisserick

118 posts in 1507 days


#2 posted 01-10-2017 10:27 PM

Nice… sets of 500? How much can one charge for a set I wonder? I made 6 in oak as a gift to a customer, who ordered an oak table. Never thought about selling them.

-- I doubt, therefore I might be

View gsimon's profile

gsimon

1234 posts in 1775 days


#3 posted 01-11-2017 12:51 AM

very cool idea!

-- Greg Simon

View NormG's profile

NormG

5762 posts in 2666 days


#4 posted 01-11-2017 01:10 AM

Made in the USA

-- Norman - I never never make a mistake, I just change the design.

View woodbutcherbynight's profile (online now)

woodbutcherbynight

3049 posts in 2071 days


#5 posted 01-11-2017 04:12 AM

Very unique. No sure about wishing to make 500 of them though. LOL

-- Live to tell the stories, they sound better that way.

View canadianchips's profile

canadianchips

2579 posts in 2659 days


#6 posted 01-11-2017 04:29 AM

Unique Idea !
I love it !

-- "My mission in life - make everyone smile !"

View helluvawreck's profile (online now)

helluvawreck

26334 posts in 2529 days


#7 posted 01-11-2017 11:51 AM

They look just like the real thing. They are very creative and I can see how they would make a popular gift or item to sell. Congratulations.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View majuvla's profile

majuvla

10382 posts in 2529 days


#8 posted 01-11-2017 12:21 PM

They are very beautiful. Good idea with country/state shape sprayed. It’s my last project too and agree about time consuming, cutting and gluing all those small parts (I made europallets with 21 pcs each – I shoul also made American pallet with 13 pcs instead, next time).

-- Ivan, Croatia, Wooddicted

View a1Jim's profile

a1Jim

115799 posts in 3239 days


#9 posted 01-11-2017 12:34 PM

cool idea,
I’ve seen some pallets that the use the strips of wood painted red and white on the pallet as the stripes in the flag also and painted blue square and the stars in one corner.

-- http://artisticwoodstudio.com Custom furniture

View Albert's profile

Albert

475 posts in 3251 days


#10 posted 01-11-2017 01:54 PM

Nice idea. Good way to while away the winter days.

View CClark86's profile

CClark86

56 posts in 1245 days


#11 posted 01-11-2017 04:48 PM

Thanks all

Sheisserick – Pricing varies depending on what it is, you can peek at my Etsy store as it is varied. Believe it or not, these things alone have almost paid for the entire hobby, some new tools included.

-- Hobbyist Homebrewer, Woodworker, Glider Pilot. But only ever two at the same time.

View dbray45's profile

dbray45

3258 posts in 2439 days


#12 posted 01-11-2017 05:09 PM

Very nice – I like it

-- David in Damascus, MD

View garriv777's profile

garriv777

138 posts in 2527 days


#13 posted 01-11-2017 11:13 PM

How thick did you go on the wood? It looks like 1/16” on the top and maybe 1/4” on the supports, is that close? It’s hard to tell because I don’t know how close they are to the camera.They came out nice.

G-Man

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com