LumberJocks

Knobs for Blast Gates

  • Advertise with us
Project by Greg The Cajun Box Sculptor posted 1605 days ago 2020 views 6 times favorited 10 comments Add to Favorites Watch
Knobs for Blast Gates
Knobs for Blast Gates No picture No picture No picture No picture No picture
Zoom Pictures

This sure makes it a lot easier to open my blast gates. I’m glad i saved all those old knobs from mt old kitchen cabinets.

-- Every step of each project is considered my masterpiece because I want the finished product to reflect the quality of my work.





10 comments so far

View Chase's profile

Chase

448 posts in 1623 days


#1 posted 1605 days ago

No kids for me just yet, but this seems like a worthy investment. Do you take visa?

-- Every neighborhood has an eccentric neighbor. I wondered for years "who was ours?" Then I realized it was me.

View Cozmo35's profile

Cozmo35

2198 posts in 1632 days


#2 posted 1605 days ago

LOL!!! That is SO wrong! LOL!!! BUT FUNNY!!!

-- If you don't work, you don't eat!.....Garland, TX

View JenWoodworking's profile

JenWoodworking

128 posts in 1667 days


#3 posted 1605 days ago

Why is it wrong, is it better to use blankets to prop it up, That is awesome, wish I would have had one!

-- Jen loves wood!

View RexMcKinnon's profile

RexMcKinnon

2593 posts in 1792 days


#4 posted 1605 days ago

Try as I might I can’t see my wife agreeing to stand in from of this thing hunched over while my son feeds. Unless maybe the corners are rounded over. ;-)

In case someone did not get that, my kids were breast fed.

-- If all you have is a hammer, everything looks like a nail!

View gmerteng's profile

gmerteng

122 posts in 1709 days


#5 posted 1605 days ago

Thanks for these posts its good to laugh out loud once and awhile.

-- Mert,Oshkosh WI,

View deon's profile

deon

2150 posts in 1622 days


#6 posted 1605 days ago

A good laugh. Wonderfull stuff

-- Dreaming patterns

View Sawdustonmyshoulder's profile

Sawdustonmyshoulder

251 posts in 2224 days


#7 posted 1604 days ago

OK. Who is going to make the “redneck” version? I see it with a little taller “v” piece for holding a long neck.

-- Makin' Sawdust!!!

View steliart's profile

steliart

1807 posts in 1285 days


#8 posted 1256 days ago

Well this is one way of doing it!

-- Stelios L.A. Stavrinides: - I am not so rich to buy cheap tools, but... necessity is the mother of inventions - http://www.steliart.com --

View dragonnotes's profile

dragonnotes

69 posts in 1628 days


#9 posted 710 days ago

Seriously, these are beautiful blast gates! What did you do to the bottom to seal it off?
I need to make these! More information please.

View Greg The Cajun Box Sculptor's profile

Greg The Cajun Box Sculptor

4930 posts in 1905 days


#10 posted 710 days ago

dragonnotes….I purchased these blast gates from Lee Valley and added the knobs for an easier grip. I like these because they never seem to get clogged up due to the gate passing through completely…seems to keep sawdust from building up. I sealed the bottoms and all joints with clear silicone

-- Every step of each project is considered my masterpiece because I want the finished product to reflect the quality of my work.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase