LumberJocks

Maple bar height table with finger joints (mid century design inspiration)

  • Advertise with us
Project by Alexandre Lussier posted 12-28-2016 01:58 PM 1645 views 4 times favorited 10 comments Add to Favorites Watch

Hi, this is a bar height table made out of maple. I had a lot of fun in the making of it because it was challenging and of course, really rewarding to see it come together nicely. I built a 45 finger joints sled to make it(see my projects) and it worked well. The stools were posted in a previous project too. I’m really happy with my decision to make woodworking my full time job. I look at 2017 with a lot of projects to come with a large smile and thankfulness to be here just where I am.

Best wishes to all of you!
Alexandre Lussier, Québec,Canada

-- Alex, Bas Saint-Laurent





10 comments so far

View horky's profile

horky

249 posts in 3108 days


#1 posted 12-28-2016 02:48 PM

VERY NICE table with a clean design. The finger joints, and your cutting jig, work very well. Thanks for sharing.
The jig, with your adjustable angle idea, is on my to-do list for sure.

View acraig5075's profile

acraig5075

16 posts in 1654 days


#2 posted 12-28-2016 04:26 PM

Wow, that is very elegant. A whole lot of angles going on there. Supreme craftsmanship.

View Ted78's profile

Ted78

401 posts in 2177 days


#3 posted 12-28-2016 07:40 PM

just imagining how to get that all laid out, makes my head hurt. Nice job.

-- Ted

View kaerlighedsbamsen's profile

kaerlighedsbamsen

1251 posts in 1891 days


#4 posted 12-28-2016 09:06 PM

Wau that looks great. The MCM inspiration shines through. That 3 part fingerjoint looks complex- cant realy see how the short stretcher is joined into the fingers?

Thank you for sharing!

-- "Do or Do not. There is no try." - Yoda

View Alexandre Lussier's profile

Alexandre Lussier

93 posts in 1012 days


#5 posted 12-28-2016 09:39 PM



Wau that looks great. The MCM inspiration shines through. That 3 part fingerjoint looks complex- cant realy see how the short stretcher is joined into the fingers?

Thank you for sharing!

- kaerlighedsbamsen


The short stretcher in joined with mortise and tenon. The mortise is in the fingers…

-- Alex, Bas Saint-Laurent

View gsimon's profile

gsimon

1290 posts in 2290 days


#6 posted 12-29-2016 02:32 AM

love it

-- Greg Simon

View MontanaBob's profile

MontanaBob

838 posts in 2861 days


#7 posted 12-29-2016 02:19 PM

Outstanding… Really like the design..

View Ampeater's profile

Ampeater

441 posts in 3925 days


#8 posted 12-29-2016 02:19 PM

That is really very nice. With some dimensional changes you could also make a nice computer table using that technique.

-- "A goal without a plan is a wish."

View Alexandre Lussier's profile

Alexandre Lussier

93 posts in 1012 days


#9 posted 12-30-2016 02:23 AM

Thank you all for the good words! That is really motivating to read your comments.

-- Alex, Bas Saint-Laurent

View grg3's profile

grg3

5 posts in 1942 days


#10 posted 12-31-2016 12:28 PM

Beautiful!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com