LumberJocks

Federal Side Board

  • Advertise with us
Project by Bartwood posted 02-27-2010 07:50 PM 1740 views 8 times favorited 30 comments Add to Favorites Watch

The Woods are Black Walnut, Maple and Ebony.
The Legs are 5 sided and tapered. The inlays were all made up as 1/8”+ thick panels and glued on to the drawer fronts and doors which were also made from walnut. I saw this in an old book of antiques I scaled it down some to fit where it was going to end up.
More oictures at www.paul-bartlett.com





30 comments so far

View norwood's profile

norwood

303 posts in 2072 days


#1 posted 02-27-2010 07:58 PM

that is beautiful well done

-- of all the things Ive lost in life i miss my mind the most

View woodworm's profile

woodworm

14144 posts in 2592 days


#2 posted 02-27-2010 08:01 PM

I just can say “wow”, I’m afraid I would wrongly worded it.

-- masrol, kuala lumpur, MY.

View Jonathan's profile

Jonathan

2608 posts in 2052 days


#3 posted 02-27-2010 08:02 PM

Great piece of craftsmanship there!

Turned out nicely… looking forward to seeing your other projects.

Thanks for sharing and welcome to LumberJocks!

-- Jonathan, Denver, CO "Constructive criticism is welcome and valued as it gives me new perspectives and helps me to advance as a woodworker."

View aurora's profile

aurora

217 posts in 2254 days


#4 posted 02-27-2010 08:11 PM

Bart,
a cornucopia of wooden delights !! really impressive piece

View Ken90712's profile

Ken90712

15762 posts in 2190 days


#5 posted 02-27-2010 08:12 PM

WOW. Great job.

-- Ken, "Everyday above ground is a good day!"

View GaryK's profile

GaryK

10262 posts in 2990 days


#6 posted 02-27-2010 08:13 PM

Fantastic job! I love it.

-- Gary - Never pass up the opportunity to make a mistake look like you planned it that way - Tyler, TX

View Beginningwoodworker's profile

Beginningwoodworker

13347 posts in 2675 days


#7 posted 02-27-2010 08:28 PM

Nice sideboard.

View Darell's profile

Darell

429 posts in 2596 days


#8 posted 02-27-2010 08:37 PM

WOW! Welcome to Lumberjocks. You’ve significantly raised the bar on here. Great work!

-- Darell, Norman, Ok.

View rwyoung's profile

rwyoung

369 posts in 2473 days


#9 posted 02-27-2010 08:49 PM

Very nice. Did you make the sand-shade fans or get some of the pre-made ones and cut them up?

-- Don't sweat the petty things and don't pet the sweaty things.

View Routerisstillmyname's profile

Routerisstillmyname

717 posts in 2511 days


#10 posted 02-27-2010 08:54 PM

Stunned, Speechless…

-- Router รจ ancora il mio nome.

View Bartwood's profile

Bartwood

7 posts in 2012 days


#11 posted 02-27-2010 09:01 PM

I made the Fans by shading the maple in hot sand. The trick it to make them larger than needed then recut after burning in the hot sand because they distort a lot with the heat.

View rcs47's profile

rcs47

182 posts in 2131 days


#12 posted 02-27-2010 09:11 PM

Very nice. Did you use maple or holly for the stringing?

Thanks for the link to your website. The tip I got is to cut the dovetails in the drawer face ends prior to gluing up the pieces for a curved drawer (for veneer front) vs. hand cut after you cut the shape out.

Great work!

-- Doug - As my Dad taught me, you're not a cabinet maker until you can hide your mistakes.

View Maveric777's profile

Maveric777

2692 posts in 2078 days


#13 posted 02-27-2010 09:22 PM

Incredible workmanship…..

-- Dan ~ Texarkana, Tx.

View wwnovice's profile

wwnovice

104 posts in 3188 days


#14 posted 02-27-2010 10:52 PM

Incredible work!

-- John

View Thos. Angle's profile

Thos. Angle

4440 posts in 2964 days


#15 posted 02-27-2010 11:13 PM

Welcome to LJ. this is an incredible piece of work. Hope we see more of your fine work here.

-- Thos. Angle, Jordan Valley, Oregon

showing 1 through 15 of 30 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com