Sanding cart with Fancy Jointery

  • Advertise with us
Project by Blake Haskins posted 12-24-2016 07:44 PM 1184 views 0 times favorited 1 comment Add to Favorites Watch

This cart which contains some quite fancy joinery, was partially inspired by Mathias wandell’s design which allows a lot of open space for storage potential due to the orientation of the 2×4s. It took about 1 day and 4 2×4s as well as a sheet of one/eighth inch plywood and the top is just some three quarter i had laying around.

Please watch this video on the build and subscribe to my channel

-- make sure you subscribe to my channel-

1 comment so far

View ralbuck's profile (online now)


5413 posts in 2468 days

#1 posted 12-24-2016 09:23 PM

Pretty fancy joining there! It should work well, Now you add some holders, and a power block , so instead of switching paper back and forth; just switch sanders.

I see you manage to get as straight of lumber as the rest of us do!

-- Wood rescue is good for the environment and me! just rjR

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics