LumberJocks

Bloodwood Ring

  • Advertise with us
Project by Mark posted 02-22-2010 10:29 PM 1418 views 2 times favorited 14 comments Add to Favorites Watch

I was wowed and astonished by another woodworkers rings and I’ve taken a whack at it before but failed. So I took another whack while watching the hockey game last night and made this ring. African bloodwood and wipe on poly. I love it.

-- M.K.





14 comments so far

View Padre's profile

Padre

930 posts in 2311 days


#1 posted 02-22-2010 10:41 PM

How did you make it?

-- Chip -----------http://www.penmanchip.com-----------------Micah 6:8

View Mark's profile

Mark

1801 posts in 2096 days


#2 posted 02-22-2010 10:47 PM

i took a spade bit ( or any drill bit) the width of my finger (3/4”)....then i take a hole saw 1/2” biggerr (1 1/4”) and drill it on the same hole on centre…theres your ring…then sand the hell out of it and finish.

-- M.K.

View AjFoyt's profile

AjFoyt

20 posts in 1951 days


#3 posted 02-23-2010 02:23 AM

Very nice, I would love to make a ring out of blood wood but the scraps i get are limited. Where do you get your wood from?

-- measure twice, cut once, curse less! Andrew, Brookens Wood Floors

View Mark's profile

Mark

1801 posts in 2096 days


#4 posted 02-23-2010 03:11 AM

theres a store in my area that sells nothing but rare exotic woods and the basics…a woodworkers palace. you name the wood they have it in bulk and different widths…thx for the comment by the way

-- M.K.

View grizzman's profile

grizzman

7319 posts in 2126 days


#5 posted 02-23-2010 03:14 AM

MARK..ITS BEAUTIFUL…GOOD JOB..MY NIECE WANTS ONE THAT IS A DOUBLE ONE…..SO I MIGHT GIVE IT A SHOT LATER THIS WEEK…WHATS NEXT…GRIZZMAN

-- GRIZZMAN ...[''''']

View jim1953's profile

jim1953

2682 posts in 2664 days


#6 posted 02-23-2010 03:35 AM

Great Lookin Ring

-- Jim, Kentucky

View Mark's profile

Mark

1801 posts in 2096 days


#7 posted 02-23-2010 03:38 AM

thx a lot grizz…its a pretty easy project…the only hard part i found was making sure i cut it out dead center of my first hole….its a nice piece of jewellery to wear knowing its craftsmanship, personaly made, and rare. talk to ya later grizz

-- M.K.

View Mark's profile

Mark

1801 posts in 2096 days


#8 posted 02-23-2010 03:39 AM

thx jim :)

-- M.K.

View scrappy's profile

scrappy

3506 posts in 2253 days


#9 posted 02-23-2010 07:12 AM

Great ring. I have done the outside on the jigsaw. That way you can get it centered or flat toped if you want. You are correct in the LOTS OF SANDING. Nice ring and nice finish.

Keep it up.

Scrappy

-- Scrap Wood's the best...the projects are smaller, and so is the mess!

View Cher's profile

Cher

936 posts in 1916 days


#10 posted 02-23-2010 06:17 PM

Good work Mark! If my youngest sees that she will be wanting a few. I don’t wear rings my safe wears them.

-- When you know better you do better.

View Mark's profile

Mark

1801 posts in 2096 days


#11 posted 02-23-2010 07:59 PM

lol…i only wear the ones that have taken a beating already…no need to look facy…but now that i’ve made a ring i think thats all im going to wear, very personal and full of character. I will be making more. Thx for the comments!

-- M.K.

View remy97's profile

remy97

206 posts in 1837 days


#12 posted 02-24-2010 12:34 AM

if you guys are lookin for wood, out here i ohio we have a place called keim lumber that sells anything you could possible want. tools, exotic wood and upstairs there is a cafe. its in charm ohio.

-- ---ray suppan--- anger + woodworking = -finger AHHHHHHHH!!!!

View Grumpy's profile

Grumpy

19987 posts in 2674 days


#13 posted 02-28-2010 03:38 AM

Very good.

-- Grumpy - "Always look on the bright side of life"- Monty Python

View Mark's profile

Mark

1801 posts in 2096 days


#14 posted 02-28-2010 06:17 PM

thx grumpy :)

-- M.K.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com