LumberJocks

Carbide tip turning tools

  • Advertise with us
Project by Steve Preslar posted 12-16-2016 03:02 PM 983 views 1 time favorited 5 comments Add to Favorites Watch

303 stainless, ground, drilled and tapped to take replacement tips I get from woodcraft. They have two rear handles, the increasing slope at the top I use when holding the handle in place under my arm, the ball at the tip is a reverse hand hold when roughing.

-- Live, lathe, and prosper. - William Gwin





5 comments so far

View Notw's profile

Notw

548 posts in 1473 days


#1 posted 12-16-2016 03:44 PM

Very nice, i really like the wood and the color combinations on the third one. Makes it easy to know which one to grab

View Andre's profile

Andre

1316 posts in 1526 days


#2 posted 12-16-2016 03:47 PM

So what came first the Chicken or the Egg, Nice handles, the use of SS makes sense. Just curious do you have a carbide tool to make these?

-- Lifting one end of the plank.

View Steve Preslar's profile

Steve Preslar

201 posts in 255 days


#3 posted 12-16-2016 05:51 PM

I made some not so fancy carbide tools so I could make these. I have now built a duplicator for the large model as it is my favorite style. I wait for the customer to tell me what tip they want before I epoxy in the 303 bar.

-- Live, lathe, and prosper. - William Gwin

View helluvawreck's profile

helluvawreck

27218 posts in 2587 days


#4 posted 12-16-2016 05:51 PM

You did a great job on these. Congratulations and welcome to Lumberjocks.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View Steve Preslar's profile

Steve Preslar

201 posts in 255 days


#5 posted 12-16-2016 09:05 PM

Thank you helluvawreck aka Charles! I’m new at this, lots to learn.

-- Live, lathe, and prosper. - William Gwin

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com