LumberJocks

CNC Harley Davidson Signs

  • Advertise with us
Project by Davethewoodworker posted 12-15-2016 12:03 AM 598 views 0 times favorited 1 comment Add to Favorites Watch

I made some more Harley Davidson signs on my CNC Router. Made 2 different looks, with the same settings.
The first one is Natural White pine, with the lettering painted orange. The second one, took a wire brush over the pine to give it a more aged look, then prestain the White pine with Dark Walnut, let dry overnight, then carved lettering.

I used the X-Carve CNC Router. Used a 90 degree V-bit, 40 inches @ minute, then used a 1/4” downcut router bit, to cut the piece out.

Thanks for checking out my signs

-- Dave the Woodworker





1 comment so far

View Jim Jakosh's profile

Jim Jakosh

19312 posts in 2888 days


#1 posted 12-19-2016 01:25 AM

Real nice signs. I like the dark one with the light letters. It looks very western..like it belongs in S Dakota!!
I’ll bet you could sell a ton of them in Sturgis!!
Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com