LumberJocks

3D cutting board

  • Advertise with us
Project by sulphurcreekcustoms posted 12-13-2016 09:10 PM 1596 views 7 times favorited 14 comments Add to Favorites Watch
3D cutting board
3D cutting board No picture No picture No picture No picture No picture
Zoom Pictures

3D cutting board

-- Chad Smith, SULPHUR CREEK CUSTOMS-Kettle, KY





14 comments so far

View ralbuck's profile

ralbuck

4572 posts in 2290 days


#1 posted 12-13-2016 09:16 PM

Very wavy looking—- giving an illusion and a cutting board.

GREAT PROJECT!

-- Wood rescue is good for the environment and me! just rjR

View Jim Jakosh's profile

Jim Jakosh

20594 posts in 3130 days


#2 posted 12-13-2016 09:19 PM

Outta sight…..........I love it. Do you have directions on making the cuts to get this design?

cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View hunter71's profile

hunter71

3186 posts in 3211 days


#3 posted 12-13-2016 09:28 PM

Great looking boads, might getdizy and cut your finger off with these.

-- A childs smile is payment enough.

View Cheapguy82's profile

Cheapguy82

72 posts in 558 days


#4 posted 12-13-2016 09:44 PM

Wow – what a neat project! Well done

-- Stephen - Georgia

View GR8HUNTER's profile

GR8HUNTER

4007 posts in 737 days


#5 posted 12-13-2016 11:49 PM

crazy wild looking ….... GREAT JOB

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View  woodshaver Tony C   's profile

woodshaver Tony C

5972 posts in 3377 days


#6 posted 12-14-2016 12:17 AM

Who needs to drink when you can just look a this crazy nice cutting board. Well done!

-- St Augustine FL, Experience is the sum of our mistakes!

View BenjaminNY's profile

BenjaminNY

131 posts in 1426 days


#7 posted 12-14-2016 11:08 AM

Awesome looking, you should post a tutorial for how you did that.

View BuckeyeMetz's profile

BuckeyeMetz

12 posts in 575 days


#8 posted 12-14-2016 12:20 PM

Kind of pointless cutting board isn’t it? Sure, your liquid will drain off well but how do you stabilize and cut something on all those valleys and peaks? Beautiful piece and an added request for further pics/plans.

View majuvla's profile

majuvla

12416 posts in 2892 days


#9 posted 12-14-2016 04:36 PM

Pretty amaizing design and 3D effect.

-- Ivan, Croatia, Wooddicted

View BenjaminNY's profile

BenjaminNY

131 posts in 1426 days


#10 posted 12-14-2016 05:28 PM



Kind of pointless cutting board isn t it? Sure, your liquid will drain off well but how do you stabilize and cut something on all those valleys and peaks? Beautiful piece and an added request for further pics/plans.

- BuckeyeMetz

There are no valleys or peaks, that’s the illusion created. A sign of how good the board came out.

View shakespeare's profile

shakespeare

22 posts in 1978 days


#11 posted 12-15-2016 03:14 PM

It actually got me; I thought it was 3D, not looking like it. Really impressively executed. I like the wood choices and the way they are laid out. I echo the need for a tutorial.

View Rich's profile

Rich

2972 posts in 613 days


#12 posted 12-20-2016 04:01 AM

That’s mind blowing. Like a M. C. Escher chopping block.

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner

View Rich's profile

Rich

2972 posts in 613 days


#13 posted 12-21-2016 06:19 AM

So how do you flatten them, Chad? I’ve never built one, but they say you can’t run them through the planer.

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner

View sulphurcreekcustoms's profile

sulphurcreekcustoms

161 posts in 559 days


#14 posted 12-21-2016 10:03 AM

Hey rich.
For the end grain boards, which are most most most definitely much tougher. Howeber, I do in fact flatten them with the planer. I just pay a lot of extra attention to getting them flat as possible during final glueup. But, I’ve never been able to sand instead of plane. And, when I plane them, I try to do so with sharp knives and then I take small bites. I have the DEWALT dw734, so not a really powerful machine. It does pretty good as long as I pay attention to my knives. I’ve literally made a hundred or more end grain boards and flattened them all with that machine. I think a drum sander would be great! Probnot in my near future though.

Good question

-- Chad Smith, SULPHUR CREEK CUSTOMS-Kettle, KY

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com