End Grain Cutting Board

  • Advertise with us
Project by Mikemccind posted 12-13-2016 01:50 AM 1583 views 4 times favorited 7 comments Add to Favorites Watch

Twin end grain cutting boards for my daughter. I used walnut, maple, sapele and zebrawood in a chevron pattern with a walnut edge framing the main pattern. To help with the second glue up of the end grain cut pieces, I made up a clamping jig that helped keep everything square and tight fitting. The base of the clamping jig has a plastic sheet that enables easy glue release and clean up. After routing side finger grips on the cutting boards and sanding to 220 grit, I used a 50/50 mineral oil and beeswax blend as the surface treatment.

-- Mike, North Webster, IN

7 comments so far

View John's profile


1370 posts in 1506 days

#1 posted 12-13-2016 02:30 AM

I never get tired of seeing beautiful cutting boards, well done!

-- John, Sunshine Coast, BC, Canada.

View wiser1934's profile


525 posts in 3383 days

#2 posted 12-13-2016 04:59 AM

wish you had posted a full face picture of these beautiful boards. can not really see the layup.

-- wiser1934, new york

View smitty22's profile


714 posts in 3183 days

#3 posted 12-13-2016 05:18 AM

Lovely boards, my favorite CB configuration with the finger grooves on the ends so either side can be used.

-- Smitty

View Ken90712's profile


17614 posts in 3424 days

#4 posted 12-13-2016 08:54 AM

Well done nice looking boards.

-- Ken, "Everyday above ground is a good day!"

View helluvawreck's profile


32086 posts in 3102 days

#5 posted 12-13-2016 02:14 PM

These are very nice cutting boards.

helluvawreck aka Charles

-- helluvawreck aka Charles,

View david38's profile


3518 posts in 2579 days

#6 posted 12-13-2016 03:57 PM

looks great

View majuvla's profile


13591 posts in 3103 days

#7 posted 12-14-2016 04:41 PM

Awesome choice of woods and you put them together in realy good combination..

-- Ivan, Croatia, Wooddicted

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics