LumberJocks

Rocking horse with recycled plywood

  • Advertise with us
Project by uygardogan posted 12-03-2016 10:44 AM 258 views 0 times favorited 1 comment Add to Favorites Watch

I made a rocking horse with recycled plywood. Thickness is 20mm. All pieces cut with scroll saw.
I used a template for the head, other parts directly drawn on plywood. All mortise & tenons prepared with a hand drill and scroll saw as 20×20mm as shown on 2nd photo.

-- cut once, sand twice





1 comment so far

View halfacre's profile

halfacre

131 posts in 2275 days


#1 posted 12-04-2016 01:06 AM

Very good looking project you have there. One thing I noticed is there is no angle bracing and as the child gets bigger and as he or she rocks back and forth the horse will collapse and could cause harm to the rider. Just my observation. I remember when my kids were small they could tear up anything…

-- halfacre, Breckenridge, Tx

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com