Spoons - take two!

  • Advertise with us
Project by Lalen posted 12-01-2016 05:59 PM 807 views 6 times favorited 3 comments Add to Favorites Watch

In a prior project I posted my first attempt at making spoons. Here is a new one. 2 completed out of walnut, 3 more in progress… 2 walnut, one cherry. (3 or 4 will be Christmas gifts)

(not sure I like the cherry one.. didn’t get a good grain match on the lamination. will have to see how it looks after finishing)

How I did it:

I traced around my wife’s favorite plastic spoon. It just fit corner to corner on an 8.5 by 11 sheet of paper.

I used 3/4 stock walnut 2 & 5/8 by 13” long and laminated another 5” piece near one end for the business end of the spoon. Cut out the patterns.. Spray adhesive to apply to the side profile first, cut out on band saw then applied the top profile the same way and cut out. I gouged out the bowl primarily using the end of my belt sander then a spindle/drum sander in my drill press.

-- Lalen, Texas. "If it looks straight, it is straight" Jimmy Diresta

3 comments so far

View woodcox's profile


2158 posts in 2213 days

#1 posted 12-02-2016 03:56 AM

Nice work Lalen. I’m sure she has a new favorite now.

-- "My god has more wood than your god" ... G. Carlin.

View helluvawreck's profile


32087 posts in 3068 days

#2 posted 12-02-2016 05:25 PM

These are a very attractive pair of spoons. Nice work!

helluvawreck aka Charles

-- helluvawreck aka Charles,

View whitebeast88's profile


4128 posts in 2392 days

#3 posted 12-05-2016 02:19 AM

Nice spoons

-- Marty.Athens,AL

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics