|Project by David Green||posted 11-30-2016 03:51 AM||573 views||4 times favorited||5 comments|
This was my first finished scroll saw project. The pattern was from Steve Good’s site. It was originally meant to have a clock insert but I couldn’t find any that small locally on short notice so I made the yin yang. The dragons and top 3/4 of the base are red oak. The bottom 1/4 of the base and the yin yang are poplar. The bottom of the pen hole is covered in black leather and peel-n-stick felt was used on the bottom. I cut the yin yang in 2 pieces and stained the dark half with ebony stain. The light dot on the dark half was actually the tip of a chopstick. I finished it with 4 coats of spray lacquer.