LumberJocks

Combo Router Table/Klamp Table

  • Advertise with us
Project by Krweatherl posted 1611 days ago 3862 views 14 times favorited 14 comments Add to Favorites Watch

Been wanting to build both a new router table and a face frame clamping table. Came up with the idea of combining the two but not being sure how I will like it I decided to use my old out feed table & cabinet as a trial run. If I like the table then I will build a nice cabinet under the table. Over the next few months I will be building a complete kitchen for my mother-in-law, I figure that should be a petty good test run. The lift is the PLR2 fitted with a Milwaukee 3 1/2 router. the fence is an Incra 32” ultra positioner I had laying around fitted with an Incra wonder fence. The blue is the Kreg Klamp Trak while the red is purple heart I shaped like the Klamp Trak simply to be a place holder until I decide if I like this design enough to purchase a couple more sections of Klamp Trak.

-- Ken; Backyard Auto Repair/Backyard Wood Creations





14 comments so far

View a1Jim's profile (online now)

a1Jim

111999 posts in 2160 days


#1 posted 1611 days ago

Thats an amazing table Ken

-- http://artisticwoodstudio.com Custom furniture

View sandhill's profile

sandhill

2102 posts in 2507 days


#2 posted 1611 days ago

Man I could use one of them, Wish I had the room.

-- Bob Egbert AKA Sandhill http://www.sandhillwoodworks.com/

View Gary Fixler's profile

Gary Fixler

1000 posts in 1965 days


#3 posted 1611 days ago

That thing is gorgeous.

-- Gary, Los Angeles, video game animator

View Splinterman's profile

Splinterman

23058 posts in 1944 days


#4 posted 1611 days ago

Hey Ken,
Sweet set-up and job.

View GuyK's profile

GuyK

356 posts in 2662 days


#5 posted 1611 days ago

This is beautifull. Let us know how it works for you. Very nice and good luck with all the cabinets.

-- Guy Kroll www.thelandsathillsidefarms.org

View SgtSnafu's profile

SgtSnafu

957 posts in 1854 days


#6 posted 1610 days ago

Very nice multifunction table you are planning there..

Thanks for sharing

-- Scotty - aka... SgtSnafu - Randleman NC

View bigike's profile

bigike

4030 posts in 1871 days


#7 posted 1610 days ago

great work

-- Ike, Big Daddies Woodshop, http://www.icombadaniels@yahoo.com

View blackcherry's profile

blackcherry

3145 posts in 2406 days


#8 posted 1610 days ago

Ken looks great and I know it going to be a joy to use, just received my LSSSys. yesterday. I sold my Ultra of 20 years, what a great piece of equipment. I would love to have the same set up but not enough room right of the TS. Thank for posting and stay safe…BC

View Scott Bryan's profile

Scott Bryan

27251 posts in 2405 days


#9 posted 1610 days ago

Now that is a nice addition to your shop. Great idea on combining the two into one table.

-- Challenges are what make life interesting; overcoming them is what makes life meaningful- Joshua Marine

View unisaw2's profile

unisaw2

179 posts in 1618 days


#10 posted 1610 days ago

Great table Ken. Thanks for sharing. Keep us updated on the Kitchen build.

-- JJ

View RexMcKinnon's profile

RexMcKinnon

2593 posts in 1778 days


#11 posted 1610 days ago

That’s a great table. Very useful.

-- If all you have is a hammer, everything looks like a nail!

View ken_c's profile

ken_c

260 posts in 1745 days


#12 posted 1610 days ago

nice setup

View Greg The Cajun Box Sculptor's profile

Greg The Cajun Box Sculptor

4896 posts in 1891 days


#13 posted 1610 days ago

Your table is a great looking and functional design Ken. Let the fun begin… It looks like you are mounting your positioner bracket on a board on adjustable tracks. Is that done so you can remove it when using the table for face frame clamping with the Kreg clamps? Good idea. It must be nice to have an Incra 32” ultra positioner laying around. I bought the LS system back in December and it is great. Definitely takes up a lot os space but worth it.

-- Every step of each project is considered my masterpiece because I want the finished product to reflect the quality of my work.

View Blake's profile

Blake

3434 posts in 2457 days


#14 posted 1609 days ago

GREAT idea! Well done too.

-- Happy woodworking! http://www.openarmsphotography.com

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase