LumberJocks

Jewelry Box

  • Advertise with us
Project by Paul_F posted 02-08-2010 11:08 PM 1853 views 14 times favorited 10 comments Add to Favorites Watch

This is a jewelry box I made for my bride one Christmas. The plans came out of ‘Wood’ magazine, but I can’t locate the issue. I modified it slightly by adding an additional drawer to give it a little more height for the necklaces. The wood is walnut and maple and I used seeded glass for the doors and side and an antique mirror for the internal panels. (I have a great local stain glass shop)

I finished the box with several coats of Watco natural oil and wax. – Yes; There was a piece of jewelry in it on Christmas morn.

-- Dust to more Dust - http://www.woodworkingplanes.org





10 comments so far

View a1Jim's profile

a1Jim

112936 posts in 2330 days


#1 posted 02-08-2010 11:11 PM

Very nice Paul I really like it.

-- http://artisticwoodstudio.com Custom furniture

View bigike's profile

bigike

4035 posts in 2041 days


#2 posted 02-08-2010 11:34 PM

nice work, now that’s a jewelry box

-- Ike, Big Daddies Woodshop, http://www.icombadaniels@yahoo.com

View crosseyedcarver's profile

crosseyedcarver

226 posts in 1790 days


#3 posted 02-09-2010 12:00 AM

Nice Job! You did a great job on the drawers and the bubled glass was a nice touch.

-- Tim, Tallahasse FL

View Maveric777's profile

Maveric777

2691 posts in 1829 days


#4 posted 02-09-2010 12:09 AM

Nice work Paul.

-- Dan ~ Texarkana, Tx.

View webwood's profile

webwood

619 posts in 2003 days


#5 posted 02-09-2010 01:02 AM

very nice

-- -erik & christy-

View kosta's profile

kosta

946 posts in 2107 days


#6 posted 02-09-2010 02:03 AM

looks good man

-- kosta Virginia Beach, VA http://www.kostasworkshop.blogspot.com/

View sras's profile

sras

3946 posts in 1882 days


#7 posted 02-09-2010 05:12 AM

Nothing like a mirror to accent sparkly things!

-- Steve - Impatience is Expensive

View Dean10's profile

Dean10

61 posts in 1782 days


#8 posted 02-09-2010 05:16 AM

I really like the lining you did with you’re drawers. Could you give me any tips on how to line my dividers like you did? beautiful though

-- "May you live in interesting times"

View Paul_F's profile

Paul_F

67 posts in 1788 days


#9 posted 02-09-2010 07:37 PM

When lining drawers I use card stock to make templates and then cut the felt to the template. In the case of dividers I try and cover them outside the box, I then cover the bottom and cut away a portion that will be covered by the divider (to provide wood on wood glue surface), then install divider with a couple dots of glue.

maluco – Thanks for the link – I had forgotten that I also reversed drawer/necklace sides.

-- Dust to more Dust - http://www.woodworkingplanes.org

View Don's profile

Don

497 posts in 1995 days


#10 posted 03-25-2010 07:10 PM

I just went to the Woodstore website to try to order the plans and it won’t allow me to use my Paypal because I’m a “non-US Paypal user” :o(

-- -- Don in Ottawa, http://www.donebydon.ca

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase