LumberJocks

Serving Tray

  • Advertise with us
Project by Linkovich posted 11-05-2016 05:46 PM 873 views 1 time favorited 12 comments Add to Favorites Watch

It’s been a while since I posted anything here or on my own page. I have mostly been making WELCOME signs for a upcoming craft show and dealing with my surprise chickens. Yes I said surprise chickens. My wife told a local farmer she used to have chickens as a child. A few days later, while I was working that same farmer just dropped off 11 chickens outside one of my barns. I am not complaining I just was not prepared for 11 chickens. Anyway I made this tray from some of the ash boards I found stacked outside the same barn these chickens were left. I used walnut for the splines, and did sort of a continuous grain around the miters. The handles have been sitting on a shelf since I made the other tray in my porjects list. I finished it with boiled linseed oil.
Thanks for looking.

-- https://www.facebook.com/pg/dirtroadwoodworks/about/





12 comments so far

View Diggerjacks's profile

Diggerjacks

2200 posts in 2917 days


#1 posted 11-05-2016 05:56 PM

Hello Linkovitch
Very nice serving tray

All is in the details

Congratulations

Thanks for sharing

-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit

View gsimon's profile

gsimon

1237 posts in 1891 days


#2 posted 11-05-2016 06:48 PM

looks great and will help carrying the eggs in :)

-- Greg Simon

View Andre's profile

Andre

1396 posts in 1584 days


#3 posted 11-05-2016 07:18 PM

All chickens, no Rooster? Tray looks nice.

-- Lifting one end of the plank.

View Linkovich's profile

Linkovich

136 posts in 1102 days


#4 posted 11-05-2016 07:34 PM



Hello Linkovitch
Very nice serving tray

All is in the details

Congratulations

Thanks for sharing

- Diggerjacks


Thanks. I like it. I hope I sell it.

-- https://www.facebook.com/pg/dirtroadwoodworks/about/

View Linkovich's profile

Linkovich

136 posts in 1102 days


#5 posted 11-05-2016 07:35 PM



looks great and will help carrying the eggs in :)

- gsimon


Thank you, but not putting anything in it. I gotta try and sell it.

-- https://www.facebook.com/pg/dirtroadwoodworks/about/

View Linkovich's profile

Linkovich

136 posts in 1102 days


#6 posted 11-05-2016 07:36 PM



All chickens, no Rooster? Tray looks nice.

- Andre


Yup. Only chickens. My wife is gonna get a rooster soon I’m sure.

-- https://www.facebook.com/pg/dirtroadwoodworks/about/

View Halc's profile

Halc

146 posts in 1380 days


#7 posted 11-05-2016 07:52 PM

I like the clean, simple lines on the tray. It looks good.

View Linkovich's profile

Linkovich

136 posts in 1102 days


#8 posted 11-05-2016 08:01 PM



I like the clean, simple lines on the tray. It looks good.

- Halc


Thank you. I’m a big fan of splined miter joints.

-- https://www.facebook.com/pg/dirtroadwoodworks/about/

View Monte Pittman's profile

Monte Pittman

26224 posts in 2116 days


#9 posted 11-06-2016 11:56 AM

Great looking tray.

I have chickens also for my wife.

-- Mother Nature created it, I just assemble it.

View Linkovich's profile

Linkovich

136 posts in 1102 days


#10 posted 11-06-2016 01:37 PM



Great looking tray.

I have chickens also for my wife.

- Monte Pittman

Thanks Monte. The chickens sure do make her happy.

-- https://www.facebook.com/pg/dirtroadwoodworks/about/

View helluvawreck's profile (online now)

helluvawreck

28165 posts in 2645 days


#11 posted 11-06-2016 05:26 PM

Nice work; congratulations.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View Todd's profile

Todd

398 posts in 1455 days


#12 posted 11-07-2016 10:01 PM

That sir is a fine job. Great work!

-- Todd, Huntsville, AL

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com