LumberJocks

Christmas Cutting Boards

  • Advertise with us
Project by GadgetXX posted 02-04-2010 03:30 AM 2522 views 10 times favorited 19 comments Add to Favorites Watch

These are Five cutting boards I made for the ladies in my family for Christmas. They are from an plan from Woodturner Pro, with some changes. They are made from Jatoba, Bloodwood and Maple finished with Mineral Oil.

-- Imagination is more important than knowledge! - Einstein





19 comments so far

View a1Jim's profile

a1Jim

116492 posts in 3387 days


#1 posted 02-04-2010 03:35 AM

Super job they look good.

-- http://artisticwoodstudio.com Custom furniture

View garysharp's profile

garysharp

119 posts in 3290 days


#2 posted 02-04-2010 03:35 AM

Very nice work, making five to start was wise, I missed one last year and had to go back and make one more.

-- Garysharp "When sharpening woodworking tools, good enough,...isn't" “Your life’s complete only when your knowledge passes on”.

View mtkate's profile

mtkate

2049 posts in 3135 days


#3 posted 02-04-2010 03:37 AM

Nice production line.

View GadgetXX's profile

GadgetXX

15 posts in 2866 days


#4 posted 02-04-2010 03:38 AM

I started with One, to work out the kinks, then built Five more, I can’t believe I don’t have a picture of one that is finshed. I will have to get one and post it, they really look good once they are oiled.

-- Imagination is more important than knowledge! - Einstein

View Loucarb's profile

Loucarb

2388 posts in 3255 days


#5 posted 02-04-2010 04:02 AM

I have a hard enough time with square ones. Very nice design & I bet they looks even better with oil.

View LittlePaw's profile

LittlePaw

1571 posts in 2888 days


#6 posted 02-04-2010 04:25 AM

I’ll bet the ladies loved them!

-- LittlePAW - The sweetest sound in my shop, next to Mozart, is what a hand plane makes slicing a ribbon.

View kosta's profile

kosta

946 posts in 3164 days


#7 posted 02-04-2010 04:31 AM

looks good

View alexsutula's profile

alexsutula

96 posts in 2864 days


#8 posted 02-04-2010 06:54 AM

Not going to lie, I envy your clamp collection. The cutting boards are nice too.

-- You can't stand apart unless you're prepared to stand alone. Alex, Cleveland

View blackcherry's profile

blackcherry

3335 posts in 3633 days


#9 posted 02-04-2010 07:14 AM

Nice work and pic’s…thanks for posting…Blkcherry

View TopamaxSurvivor's profile

TopamaxSurvivor

18062 posts in 3486 days


#10 posted 02-04-2010 08:57 AM

They sure look good. Bet they were a hit!! Welcome to LJ!!

-- Bob in WW ~ "some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence

View degoose's profile

degoose

7221 posts in 3164 days


#11 posted 02-04-2010 08:58 AM

These are a fine example of the design…. well done…

-- Don't drink and use power tools @ lasercreationsbylarry.com.au

#12 posted 02-04-2010 10:21 AM

dude you have way too many clamps for one person.

-- i wonder if obama stood in a wind storm with them big ears of his would he start spinning like a drill bit

View Ken90712's profile

Ken90712

17488 posts in 2998 days


#13 posted 02-04-2010 11:35 AM

Very Nice!

-- Ken, "Everyday above ground is a good day!"

View Jonathan's profile

Jonathan

2608 posts in 2860 days


#14 posted 02-04-2010 04:55 PM

Really attractive and vibrant pattern.

Was this the basic pattern on the plan and you modified for sizing, or how did you modify the plans?

Would love to see pictures of them oiled! If you can, please add a pic. of the completed one.

-- Jonathan, Denver, CO "Constructive criticism is welcome and valued as it gives me new perspectives and helps me to advance as a woodworker."

View Andy's profile

Andy

1681 posts in 3718 days


#15 posted 02-04-2010 07:30 PM

Very sharp looking boards, and your setup is great.

-- If I can do it, so can you.

showing 1 through 15 of 19 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com