Plant Hanger

  • Advertise with us
Project by Cozmo35 posted 02-02-2010 10:02 PM 1417 views 0 times favorited 4 comments Add to Favorites Watch

These were cut on my scroll saw from one inch Mahogany. I mounted them (two) on the outside of my garage. It is a good thing I mounted them good. The plant was stolen and I am sure if the hanger wasn’t up there good, it would have “walked off” too!

-- If you don't work, you don't eat!.....Garland, TX

4 comments so far

View a1Jim's profile


117126 posts in 3605 days

#1 posted 02-02-2010 10:55 PM

Very nice, super design

-- wood crafting & woodworking classes

View mtkate's profile


2049 posts in 3353 days

#2 posted 02-03-2010 05:10 AM

Thanks for posting this – I have had something similar on my mind for many years….

View Cozmo35's profile


2200 posts in 3064 days

#3 posted 04-27-2010 02:36 PM

There are hangers you can buy at the local home improvement store that are used for shelfs. They will allow you to put a nail or screw into the wall and hang the piece on it. You place the nail/screw into the wall where you want it and then just hang it up. For this piece, I had to use a large “16 penny” nail. That is becuse of the weight. You may want to recess the hanger into the piece as deep as the hanger is thick. Good Luck!

-- If you don't work, you don't eat!.....Garland, TX

View grosa's profile


1004 posts in 2857 days

#4 posted 12-05-2010 05:46 PM

I like that design, I see brackets, spandrels, screen doors, and so on. Great job. Nornally I use a key hole cut on the back of brackets and corbels to hang them.

-- Have a great day.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics