LumberJocks

Arch frameless picture frame holder

  • Advertise with us
Project by Canon posted 10-16-2016 11:53 PM 450 views 1 time favorited 3 comments Add to Favorites Watch

Here is part two to my frameless wavy picture frame
Holders. These are my arch designs. I made a smaller version about 8 inches and have another form built for a 13in design not yet produced





3 comments so far

View oldnovice's profile

oldnovice

5730 posts in 2833 days


#1 posted 10-17-2016 04:07 AM

Nice concept!
How did you bend the wood?

-- "I never met a board I didn't like!"

View Canon's profile

Canon

29 posts in 415 days


#2 posted 10-17-2016 11:40 AM

Hi i created a form from gluing together 2, 2×6 to the
Equal height of the three pieces of wood that are about 3/4 of inch thick. Then planed the 2×6 to
The height of those three boards which are also glued up. I just drew a design I thought would look good. I have about five different design forms I created at various lengths
Greg

View NormG's profile

NormG

5507 posts in 2469 days


#3 posted 10-21-2016 12:40 AM

These are a wonderful idea and are pretty enjoyable to make

-- Norman - I never never make a mistake, I just change the design.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com