LumberJocks

homemade tool for turning wood

  • Advertise with us
Project by ANATOLII MATIASHCHUK posted 09-28-2016 06:59 PM 1556 views 1 time favorited 9 comments Add to Favorites Watch

Hi Friends, Here You Will See The Process Of Making https://youtu.be/XJnqS6QE8EI

-- Anatolii UKRAINE https://www.youtube.com/channel/UCJuV0Qghalv8QkgY8XJPkSg





9 comments so far

View Jim Jakosh's profile

Jim Jakosh

20756 posts in 3158 days


#1 posted 09-28-2016 08:11 PM

TAPS SURE HAVE SOME GOOD HARD STEEL FOR WOOD CUTTING

JIM

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View ANATOLII MATIASHCHUK's profile (online now)

ANATOLII MATIASHCHUK

316 posts in 693 days


#2 posted 09-28-2016 08:18 PM

View putty's profile

putty

1199 posts in 1660 days


#3 posted 09-29-2016 02:49 AM

Great repurpose of the taps!
Whit is the flat bladed tool you turn with? It looks to me like a gasket scraper.

-- Putty

View BobWemm's profile

BobWemm

2486 posts in 1979 days


#4 posted 09-29-2016 03:28 AM

Great Idea.

Bob

-- Bob, Western Australia, The Sun came up this morning, what a great start to the day. Now it's up to me to make it even better. I've cut this piece of wood 4 times and it's still too damn short.

View ANATOLII MATIASHCHUK's profile (online now)

ANATOLII MATIASHCHUK

316 posts in 693 days


#5 posted 09-29-2016 01:36 PM

View GR8HUNTER's profile (online now)

GR8HUNTER

4117 posts in 765 days


#6 posted 09-29-2016 02:40 PM

very nice good use of old taps …....... GREAT JOB

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View Planeman40's profile

Planeman40

1192 posts in 2814 days


#7 posted 09-29-2016 05:31 PM

Nice work!!! And it is always a pleasure working with tools you have made.

-- Always remember: It is a mathematical certainty that half the people in this country are below average in intelligence!

View ANATOLII MATIASHCHUK's profile (online now)

ANATOLII MATIASHCHUK

316 posts in 693 days


#8 posted 09-29-2016 05:46 PM

Thank you Palneman40

-- Anatolii UKRAINE https://www.youtube.com/channel/UCJuV0Qghalv8QkgY8XJPkSg

View bobasaurus's profile

bobasaurus

3498 posts in 3237 days


#9 posted 09-29-2016 06:39 PM

Looks like a great re-purposing of an unlikely tool. You might want to temper it softer so it won’t snap on you in use… taps are generally made very hard (and thus very brittle). You could heat it with a torch until yellow or maybe purple (ideally you’d want purple/blue as it approaches the handle and light yellow on the edge) then dunk in water to stop the process. Might have to reglue into your handle after.

-- Allen, Colorado (Instagram @bobasaurus_woodworking)

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com