|Project by rilanda||posted 09-27-2016 03:06 PM||345 views||1 time favorited||6 comments|
This bowl is made from Ash in the usual way but after turning and finishing the underside the bowl is remounted on the lathe using the chucking socket previously turned. The top surface is turned flat, sanded and cleaned up to a finish, then the surface is sprayed with an ebonising black acrylic spray and allowed to dry. Once the surface is dry a gold cream paste grain filler is rubbed into the open grain of the Ash to highlight the grain, then once that is dry and sprayed with a clear acrylic lacquer that is allowed to dry the centre of the bowl is turned out to reveal the natural cream colour of the Ash. The effect is to give and added interest to the bowl with the impact of the black against the cream. The last picture is of the bowl with some of the wooden fruit I made from an old apple tree.
-- Bill, Nottingham. Remember its not waiting for the storm to end, but learning to dance in the rain that counts. If you dont make mistakes, you make nothing at all.