Square bowls

  • Advertise with us
Project by Joe_Gard posted 09-21-2016 03:40 AM 1035 views 4 times favorited 11 comments Add to Favorites Watch

This weekend i made a couple of square bowls from some scrap pieces The first one is made from maple and walnut left over from a cutting board project. The second is Maple and Mahogany. The Mahogany is from a front door i replaced this summer. Over all i’m really pleased with the shape and color contract and will probably be making more of these in the future.

11 comments so far

View majuvla's profile


13581 posts in 3102 days

#1 posted 09-21-2016 10:09 AM

Squared, but nicely curved from inside. Those inlays look good too.

-- Ivan, Croatia, Wooddicted

View BobWemm's profile


2588 posts in 2161 days

#2 posted 09-21-2016 11:37 AM

Those look great, I love the colour contrast.
Did you use a scrap piece along the edges to prevent chipping?????

Thanks for sharing,


-- Bob, Western Australia, The Sun came up this morning, what a great start to the day. Now it's up to me to make it even better. I've cut this piece of wood 4 times and it's still too damn short.

View Notw's profile


677 posts in 1988 days

#3 posted 09-21-2016 02:25 PM

I really like these, well done

View ScottM's profile


696 posts in 2381 days

#4 posted 09-21-2016 02:26 PM

Very nice. Are these turned?

View GR8HUNTER's profile


5366 posts in 947 days

#5 posted 09-21-2016 02:43 PM

very kewl looking …... I love them …....wondering just how you did them …..... oh I can tell by your keys … are a very smart man …... LOL …........GREAT JOB

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View MilFlyer's profile


941 posts in 1907 days

#6 posted 09-21-2016 04:53 PM

Those are really neat! I’m guessing router and jig for the curving? Inquiring minds want to know! :)

-- VR, Richard "Fear is nothing more than a feeling. You feel hot. You feel hungry. You feel angry. You feel afraid. Fear can never kill you"--Remo Williams

View helluvawreck's profile


32086 posts in 3101 days

#7 posted 09-21-2016 05:23 PM

This is beautiful. Nice work!

helluvawreck aka Charles

-- helluvawreck aka Charles,

View robscastle's profile


5627 posts in 2439 days

#8 posted 09-22-2016 08:54 AM

The work you have done is certainly eye catching.
I took a second look to try to figue out the key and smart man realtionship… still thinking.

-- Regards Rob

View Joe_Gard's profile


7 posts in 863 days

#9 posted 09-22-2016 05:21 PM

Hey everyone, thanks for the complements! Sorry for the slow reply, been a busy week.
These were turned on a Lathe. To try to keep the edges from chipping, i cranked up the speed of the lathe and kept the tools sharp and in the end was probably more than a little lucky. I did have a little tear-out along the edge, but nothing that couldn’t be sanded out.

View Joe_Gard's profile


7 posts in 863 days

#10 posted 09-23-2016 01:10 AM

Hey Robscastle, i assumed Grshunter recognize the key as a Ford…

View Matt Vredenburg's profile

Matt Vredenburg

192 posts in 3649 days

#11 posted 09-30-2016 03:04 AM

I love this tray. I need to try to make one of these in the future. I love your inlay! Great job and thanks for sharing your project with everyone!

-- Matt, Arizona

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics