or Join Now!
Made of 12 rings of vertically leminated plywood and each ring is made of 6 segments. The same thing with the lip, 6 segments, but higher.
-- Sam Shakouri / CREATING WONDERS WITH WOOD.....Sydney,Australia....
home | projects | blog
1200 posts in 2662 days
Preview this project card
1932 posts in 2943 days
#1 posted 01-21-2010 12:00 AM
Now THAT is a wild turning! I really like that and may have to give it a try.
-- Carpenter assembles with hands, Designer builds with brains, Artist creates with heart!
11501 posts in 3330 days
#2 posted 01-21-2010 12:02 AM
This is COOL!
Never would have imagined that plywood edges could be finished so beautifully.
-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.
1396 posts in 2699 days
#3 posted 01-21-2010 12:06 AM
wow wow wow, that is so gorgeous and who would ever think it’s plywood. I’d be interested to know if the plywood renders any pitting.
317 posts in 2937 days
#4 posted 01-21-2010 12:06 AM
Nice real nice will try some time too,well done
4541 posts in 2649 days
#5 posted 01-21-2010 12:13 AM
Awesome! Once again LJs have shown me something I never would have thought of.
-- Rich, Cedar Rapids, IA - I'm a woodworker. I don't create beauty, I reveal it.
1047 posts in 3206 days
#6 posted 01-21-2010 12:15 AM
This is wild I love it!!!
-- Rj's Woodworks,San Jose & Weed Ca,
27251 posts in 3397 days
#7 posted 01-21-2010 12:25 AM
This is certainly a unique vase. It has an interesting appearance and I would never have guessed that it was made from plywood.
-- Challenges are what make life interesting; overcoming them is what makes life meaningful- Joshua Marine
179 posts in 2644 days
#8 posted 01-21-2010 12:39 AM
Sam, Wow very nice, how hard is it to sand to a nice finish? Many voids in the plywood? What grade of plywood was used?Thanks for the inspiration.
-- "aim small miss small" m g breedlove
1697 posts in 3266 days
#9 posted 01-21-2010 12:45 AM
Sam that is so funky you must do a how to so we can all try this one
-- cut it saw it scrap it SKPE: ANDREW.CARTER69
128 posts in 2645 days
#10 posted 01-21-2010 12:48 AM
So cool, I love this.
-- Jen loves wood!
951 posts in 2682 days
#11 posted 01-21-2010 01:27 AM
that looks insanely awesome, well done!
-- - Jei, Rockford IL - When in doubt, spray it with WD-40 and wrap it with duct tape. The details will attend to themselves.
3978 posts in 3150 days
#12 posted 01-21-2010 02:59 AM
That’s a lot of laminating Sam, but you’re taken plywood to a whole new level !That came out really wild looking !
-- Eric, central Florida / Utor praemia operibus duris
1569 posts in 3412 days
#13 posted 01-21-2010 03:09 AM
Sorry…....... Just isn’t my cup of tea….......
But like grandpa used to say- ” if everyone liked the same things : then everyone would be after grandma !!
-- Brian, Ontario Canada,
190 posts in 2860 days
#14 posted 01-21-2010 03:11 AM
Very inspiring I have seen a shallow plate made from plywood but never thought of raising the height for a vase.
-- David '65
45 posts in 2632 days
#15 posted 01-21-2010 04:36 AM
mesmerizing work…what do you use to fill tha inevitable voids???
-- rookie ...we'll see what happens...
View all comments »
showing 1 through 15 of 32 comments
Go to Pulse page »
©2017 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics