LumberJocks

Geometric Cutting Board

  • Advertise with us
Project by richgreer posted 01-19-2010 04:40 AM 4852 views 11 times favorited 15 comments Add to Favorites Watch
Geometric Cutting Board
Geometric Cutting Board No picture No picture No picture No picture No picture
Zoom Pictures

I’ve seen a lot of interesting and creative cutting boards on this site. I decided to try one of my own.

People who know me and my work will realize that this is not my normal style. Maybe that’s why I made it. I wanted to step out of my comfort zone.

This is walnut and maple and how I made this should be obvious. The strips of wood start with a minimum thickness of 1/8th of an inch and each subsequent strip goes up by 1/16th of an inch over the previous one.

Finished with Salad oil

-- Rich, Cedar Rapids, IA - I'm a woodworker. I don't create beauty, I reveal it.





15 comments so far

View mgb_2x's profile

mgb_2x

171 posts in 2066 days


#1 posted 01-19-2010 04:43 AM

Nice job Rich!

-- "aim small miss small" m g breedlove

View fineamerican's profile

fineamerican

150 posts in 2111 days


#2 posted 01-19-2010 04:53 AM

That is very cool! Definatley a eye catcher.

-- John A. Thomas, South Carolina, www.thomaswoodworker.com

View zlatanv's profile

zlatanv

691 posts in 2231 days


#3 posted 01-19-2010 05:59 AM

Very cool design.

-- Z, Rockwall, TX

View Ken90712's profile

Ken90712

15758 posts in 2185 days


#4 posted 01-19-2010 12:07 PM

Cool. I like the fact that its different!

-- Ken, "Everyday above ground is a good day!"

View KnotCurser's profile

KnotCurser

1916 posts in 2065 days


#5 posted 01-19-2010 02:06 PM

Rich,

Love this look!

How did you get the 45’s so perfect?

-- Robert Rhoades WoodWorks / Email: rrww@rhoadesclan.com / www.rhoadesclan.com

View Dave Haynes's profile

Dave Haynes

202 posts in 2350 days


#6 posted 01-19-2010 03:04 PM

Vaeary cool! I love it when people step in another direction. I just know you had fun matching up the maple and walnut pieces at their ends.

-- Dave Haynes, Indiana, http://www.oldaveswoodshop.com

View richgreer's profile

richgreer

4541 posts in 2071 days


#7 posted 01-19-2010 03:56 PM

KnotCurser – The “45s” are actually “60s”. I initially the straightest, truest cut I could on the TS. Then I made on pass of each edge on the jointer. Everything lined up almost perfectly. A very slight gap at one end was filled in with some wood filler. The hardest part was the final gluing.

-- Rich, Cedar Rapids, IA - I'm a woodworker. I don't create beauty, I reveal it.

View GMman's profile

GMman

3902 posts in 2694 days


#8 posted 01-19-2010 03:58 PM

I like it a lot good mix of wood, great job.

View smoke's profile

smoke

123 posts in 2018 days


#9 posted 02-19-2010 05:39 AM

beautifully amazing! maybe that will get some creative thoughts flowing

View Maveric777's profile

Maveric777

2692 posts in 2073 days


#10 posted 03-02-2010 05:16 AM

Awesome work Rich….

-- Dan ~ Texarkana, Tx.

View Dusty56's profile

Dusty56

11777 posts in 2685 days


#11 posted 05-14-2010 10:15 PM

Are those butt joints , or did you biscuit or dowel them or what ? Very nice looking board, Rich.

-- I'm absolutely positive that I couldn't be more uncertain!

View richgreer's profile

richgreer

4541 posts in 2071 days


#12 posted 05-14-2010 10:26 PM

I used some biscuits. I think you need that with end grain to end grain.

-- Rich, Cedar Rapids, IA - I'm a woodworker. I don't create beauty, I reveal it.

View Dusty56's profile

Dusty56

11777 posts in 2685 days


#13 posted 05-14-2010 10:27 PM

Thanks , Rich ….I would do the same : )

-- I'm absolutely positive that I couldn't be more uncertain!

View Taigert's profile

Taigert

593 posts in 2837 days


#14 posted 11-04-2010 12:47 PM

That is really wild, I like it

-- Taigert - Milan, IN

View Dustmite97's profile

Dustmite97

430 posts in 2217 days


#15 posted 01-03-2011 04:25 AM

That is very cool! There are so many cool cutting board designs I need to try.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com