LumberJocks

Natural edge Walnut Table

  • Advertise with us
Project by RogerM posted 09-10-2016 03:03 PM 555 views 0 times favorited 5 comments Add to Favorites Watch

Natural Edge Black Walnut top on Curly Maple base. Base was done in dovetail and mortise and tenon joinery. Finish on base is analine dye with shellac sealer and multiple polyurethane top coats. Finish on top is dilute Minwax Golden Oak stain with shellac sealer and multiple coats of polyurethane. Practice mock up of mortise and tenon apron/leg joints done in Pine.

-- Roger M, Aiken, SC





5 comments so far

View Jim Jakosh's profile

Jim Jakosh

16564 posts in 2496 days


#1 posted 09-10-2016 06:16 PM

Beautiful table. I love the curly maple and the curve in the long aprons to give it a real fine look.

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View RogerM's profile

RogerM

746 posts in 1790 days


#2 posted 09-10-2016 08:29 PM

Thanks Jim. Love your shop!!!!

-- Roger M, Aiken, SC

View grizzman's profile

grizzman

7767 posts in 2694 days


#3 posted 09-11-2016 10:03 AM

that is a beautiful piece of walnut and the wood choice for the base is spot on, my one thought about your table is i think it could have a better look if the legs were a bit larger, it just seems that the legs being that small dont enhance the top, its just my thoughts, and i say it just as a thing to ponder on, you did a beautiful job and your going to have the joy of seeing it for a long time.

-- GRIZZMAN ...[''''']

View pottz's profile

pottz

709 posts in 375 days


#4 posted 09-13-2016 09:21 PM

i gotta say natural edge tables are my weakness,you did a nice job on this one.i kinda agree with grizzman about the legs though a little beefier would have looked even better,but ill still give you 5 stars.

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

View RogerM's profile

RogerM

746 posts in 1790 days


#5 posted 09-14-2016 01:30 PM

Understand about the legs, however, the only curly maple I had for the legs was just 1 3/4” thick. Although not obvious in the photos, they have a gentle curve outwards that goes over real well in the area where I live. These tables are designed to be used behind a sofa or in a narrow hallway which often dictates a more “delicate” design.

-- Roger M, Aiken, SC

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com