simply jig

  • Advertise with us
Project by ZAGREB posted 09-08-2016 07:50 PM 2265 views 2 times favorited 11 comments Add to Favorites Watch
simply jig
simply jig No picture No picture No picture No picture No picture
Zoom Pictures

very useful and simply jig
I found it at Matthias Wandel youtube chanel
c&c are wellcome

-- bambi

11 comments so far

View Jim Jakosh's profile

Jim Jakosh

19966 posts in 2981 days

#1 posted 09-08-2016 08:12 PM

Neat, Bambi. Would that be a lathe saw or a saw lathe jig!?

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View kiefer's profile


5618 posts in 2542 days

#2 posted 09-08-2016 08:36 PM

Hi Bambi
That is a useful jig does the threaded rod turn in bushing or bearings .

Here is my setup and when I built it I ask Matthias Wandel if he had any ideas how to improve it and he suggested to tilt the blade and get smoother cutting results and I also use it for sanding the work smooth .
I originally used this some thirty years ago to make some quarter columns for an office desk and it worked very well and have been using it ever since .

-- Kiefer

View Richard W. Hyman Jr's profile

Richard W. Hyman Jr

737 posts in 1547 days

#3 posted 09-08-2016 10:34 PM

Pretty neat stuff. Have you had a chance/need to use it on any projects yet?

-- VR, Richard "Fear is nothing more than a feeling. You feel hot. You feel hungry. You feel angry. You feel afraid. Fear can never kill you"--Remo Williams

View BobWemm's profile


2370 posts in 1801 days

#4 posted 09-09-2016 12:00 AM

A very handy Jig. I can imagine many uses for it.

Thanks for sharing.


-- Bob, Western Australia, The Sun came up this morning, what a great start to the day. Now it's up to me to make it even better. I've cut this piece of wood 4 times and it's still too damn short.

View Grumpy's profile


23467 posts in 3726 days

#5 posted 09-09-2016 05:25 AM

Good idea. My first attempt at turning was to make snooker table legs from 6”x6” timber powered by a small electric drill. Mind you there were a lot of safety issues there that I wouldn’t employ today.

-- Grumpy - "Always look on the bright side of life"- Monty Python

View majuvla's profile


11496 posts in 2743 days

#6 posted 09-09-2016 05:45 AM

Vau! Idemo u ekstreme! Prijatel, vidim da ti fali ‘kopirka’ strojček. U biti, vrlo efikasno za napraviti bilo kakav valjkasti oblik. Moram priznati da sam bio lijen to napraviti kad sam radio valjke za ‘oscilating spindle sander’, iako sad vidim da bi to bilo puno brže.

-- Ivan, Croatia, Wooddicted

View Cliff 's profile


1171 posts in 1599 days

#7 posted 09-09-2016 07:29 AM

Very useful Jig bambi…well done!!!!!!!


-- Cliff Australia : Snoring is good. It blows away all the Sawdust.

View helluvawreck's profile


29779 posts in 2742 days

#8 posted 09-09-2016 12:48 PM

That’s a very useful jig. Nice work.

helluvawreck aka Charles

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View Diggerjacks's profile


2220 posts in 3014 days

#9 posted 09-09-2016 04:25 PM

Hello Bambi

A very useful jig

New opportunities for your shop and a lot projects for the future !!!

Thanks for shraing

-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit

View ZAGREB's profile


774 posts in 1525 days

#10 posted 09-09-2016 08:41 PM

thanks my friends for nice words

-- bambi

View robscastle's profile


4735 posts in 2079 days

#11 posted 09-10-2016 07:30 AM

Ah yes, the humble table saw is a great addition to the workshop its uses seem unlimited compared to the other tools we have.

-- Regards Robert

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics