|Project by ralbuck||posted 09-08-2016 06:37 PM||572 views||0 times favorited||12 comments|
Just some candle holders made form apple wood.
Playing a little on the little H-F turning lathe.
The taller is 5-1/4 while the shorter is 4-3/4 inches tall. Both are 3 inch diameter.
The holders were turned as 1 piece then cut apart with a miter saw. Torching was done on a support with a hand propane torch. The candle hole was drilled on the drill-press with a 1-1/2 Fostner bit.
Finish is just 2 coats of a Krylon semi-gloss acrylic spray.
-- just rjR