or Join Now!
Just getting back into a little wood working and had some scrap cedar laying around. I was re-sawing some pieces and luckily cut this knot perfectly in half, so I used it for the cover.
home | projects | blog
17 posts in 231 days
Preview this project card
arts and crafts
3743 posts in 1808 days
#1 posted 09-07-2016 12:40 AM
Unlike the Space Shuttle that looks like a perfect re entry effort!My Assessment:-Box joints get a tick …well doneCannot see the hinges (0)Clasp an interesting variation on a simple latch so thats a tick as wellCannot see inside (0)I hope thats not the wifes car bonnet otherwise you may be in trouble!
Welcome back I case you have forgotten you can post up to six pictures in the Project area, and then as many as you like in the story area along with all the interesting methods used to achive such a nice piece.
Scrap timber eh , well I wish I had some “scrap timber” like it just lying around!
-- Regards Robert
814 posts in 2224 days
#2 posted 09-07-2016 12:52 AM
17962 posts in 2709 days
#3 posted 09-07-2016 01:04 AM
Good looking box and you did a super job on the box joints!!
-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!
228 posts in 846 days
#4 posted 09-07-2016 10:00 PM
Good job on the joints and I like the knot on top.
-- Don Solomon, New Castle, IN; Quality is not an act, it is a habit. Aristotle
1738 posts in 316 days
#5 posted 09-07-2016 10:52 PM
looks to me like A very nice box joint …...GREAT JOB
-- Tony Reinholds,Pa. REMEMBER TO ALWAYS HAVE FUN
Go to Pulse page »
©2017 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics