LumberJocks

DIY Super-Gripper Pusher al-a Grr-ripper

  • Advertise with us
Project by CrazyRussianWoodShop posted 09-01-2016 06:26 PM 3477 views 20 times favorited 14 comments Add to Favorites Watch

Hi guys!

Here is my new table saw pusher. I was inspired by the Grr-ripper pusher (MicroJig) to build my own version of it.
All comments are welcomed!

Here is the video of the process and its capabilities (3.5 min.): https://www.youtube.com/watch?v=9hFoFq-69uM

Be safe and happy woodworking!

Michael Makarevich (CrazyRussianWoodShop)

-- Michael Makarevich (CrazyRussianWoodShop): https://www.youtube.com/channel/UCYNOkVS7B5_6A3GgNq7TtrQ





14 comments so far

View mirock's profile

mirock

196 posts in 2776 days


#1 posted 09-01-2016 07:05 PM

Real pusher for real woodworker!
Great, Michael!

-- Dad, husband and everythingmaker

View majuvla's profile

majuvla

13038 posts in 3013 days


#2 posted 09-01-2016 07:47 PM

It’s good as original and you showed us how easy it is to make.Great work.

-- Ivan, Croatia, Wooddicted

View CrazyRussianWoodShop's profile

CrazyRussianWoodShop

192 posts in 790 days


#3 posted 09-01-2016 08:11 PM



It s good as original and you showed us how easy it is to make.Great work.

- majuvla


Thanks, Ivan!
I already upgraded this pusher to a full copy of the Grr-ripper. It can do everything the real one can:)) But it is a little trickier to build as you have to bend/mill plexiglass a little. But not that much harder…:)

-- Michael Makarevich (CrazyRussianWoodShop): https://www.youtube.com/channel/UCYNOkVS7B5_6A3GgNq7TtrQ

View helluvawreck's profile

helluvawreck

32083 posts in 3012 days


#4 posted 09-02-2016 09:26 AM

This is a very nice shop built tool and will make a great addition to your shop.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View MustacheMike's profile

MustacheMike

261 posts in 2234 days


#5 posted 09-02-2016 09:52 AM

Nice job!!

-- You can trust Mike -" because I will never pull your stash!" See my show weekly at Stumpynubs.com

View bushmaster's profile

bushmaster

3233 posts in 2428 days


#6 posted 09-02-2016 01:16 PM

thanks for the instruction and video demonstration. ween a number of these but never really understood how they worked. W have to try one for increased safety.

-- Brian - Hazelton, British Columbia

View CrazyRussianWoodShop's profile

CrazyRussianWoodShop

192 posts in 790 days


#7 posted 09-02-2016 03:58 PM



thanks for the instruction and video demonstration. ween a number of these but never really understood how they worked. W have to try one for increased safety.

- bushmaster


Glad I was helpful!
This is the simplified version of a real Grr-ripper. I already upgraded my jig with the feather board and other attachments that the real Grr-ripper has in its deluxe package. Now it can easily cut sushi sticks in half:)
It will be a sequel video to this one. But for the real world application this simplified version is enough most of the time. It is simpler and less bulky than the version with the feather board etc…

-- Michael Makarevich (CrazyRussianWoodShop): https://www.youtube.com/channel/UCYNOkVS7B5_6A3GgNq7TtrQ

View CrazyRussianWoodShop's profile

CrazyRussianWoodShop

192 posts in 790 days


#8 posted 09-02-2016 04:09 PM



Nice job!!

- MustacheMike


Thank you, Mike!

-- Michael Makarevich (CrazyRussianWoodShop): https://www.youtube.com/channel/UCYNOkVS7B5_6A3GgNq7TtrQ

View CrazyRussianWoodShop's profile

CrazyRussianWoodShop

192 posts in 790 days


#9 posted 09-02-2016 04:10 PM



Real pusher for real woodworker!
Great, Michael!

- mirock


Ha, ha! Thanks, Vlad

-- Michael Makarevich (CrazyRussianWoodShop): https://www.youtube.com/channel/UCYNOkVS7B5_6A3GgNq7TtrQ

View CrazyRussianWoodShop's profile

CrazyRussianWoodShop

192 posts in 790 days


#10 posted 09-02-2016 04:11 PM


This is a very nice shop built tool and will make a great addition to your shop.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

- helluvawreck


Thanks, Charles! I use it all the time :)

-- Michael Makarevich (CrazyRussianWoodShop): https://www.youtube.com/channel/UCYNOkVS7B5_6A3GgNq7TtrQ

View Diggerjacks's profile

Diggerjacks

2270 posts in 3284 days


#11 posted 09-02-2016 05:18 PM

Hello CrazyRussianWoodShop

A very nice project

A real good addition for your shop and all the shop in the world !!!

Thanks for sharing

-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit

View CrazyRussianWoodShop's profile

CrazyRussianWoodShop

192 posts in 790 days


#12 posted 09-02-2016 08:19 PM



Hello CrazyRussianWoodShop

A very nice project

A real good addition for your shop and all the shop in the world !!!

Thanks for sharing

Thank you! Hope this simple design will save a few fingers around the world! :)

- Diggerjacks


-- Michael Makarevich (CrazyRussianWoodShop): https://www.youtube.com/channel/UCYNOkVS7B5_6A3GgNq7TtrQ

View robscastle's profile

robscastle

5313 posts in 2349 days


#13 posted 09-04-2016 07:17 AM

Michael,

Thats an impressive and clever piece of work.
Next thing we know you will be copying the Space Shuttle!!

Back in May 2012 I made a very crude version mainly because of the unavailibility of the GRR Ripper in Queensland.
I think now 4 years later they are available, some are slow to PU on a great product and market it.

-- Regards Rob

View JPJ's profile

JPJ

819 posts in 2765 days


#14 posted 09-07-2016 03:09 AM

Nice job!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com