Rolling Pin #3

  • Advertise with us
Project by drbyte posted 08-31-2016 06:57 PM 765 views 0 times favorited 4 comments Add to Favorites Watch

Rolling pin made for a cousin. Used Cherry, Maple, and Mahogany for the body. Handles are Cherry. Pin is oiled with several coats of Mineral Oil. 5/16” Axle all the way through body. Three inch Stainless Steel tubing at each end for bushings. Nylon spacer at each end between handle and body. Rolls real smooth. Axle pushed into handles about 3 inches and epoxied. Body is 12 inches by 3 inches, handles are 5 inches each. Thanks for looking!

-- Dennis, WV

4 comments so far

View lew's profile


12153 posts in 3810 days

#1 posted 08-31-2016 07:04 PM

Nicely Done!

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View Ron Stewart's profile

Ron Stewart

124 posts in 2559 days

#2 posted 08-31-2016 09:48 PM

As an LSU fan and graduate, I’ll say that’s the best rolling pin ever! Go Tigers!


-- Ron Stewart

View drbyte's profile


804 posts in 4117 days

#3 posted 09-01-2016 12:35 PM

Thanks Ron and Lew!

-- Dennis, WV

View JPJ's profile


819 posts in 2674 days

#4 posted 09-07-2016 03:26 AM

Nice job!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics