LumberJocks Woodworking Forum banner

Project Information

Rolling pin made for a cousin who is a big LSU fan. Used Cherry, Maple, and Mahogany for the body. Handles are Maple. Pin is oiled with several coats of Mineral Oil. 5/16" Axle all the way through body. Three inch Stainless Steel tubing at each end for bushings. Nylon spacer at each end between handle and body. Rolls real smooth. Axle pushed into handles about 3 inches and epoxied. Body is 12 inches by 3 inches, handles are 5 inches each. Thanks for looking!

Gallery

Comments

· Registered
Joined
·
4,567 Posts
Great sports fan rolling pin!!

Jim
 
Top