LumberJocks

new jewelry box (too me anyway )

  • Advertise with us
Project by eddy posted 01-15-2010 04:16 AM 1588 views 4 times favorited 7 comments Add to Favorites Watch

i took the lidded boxes i have been making and the valet boxes and made this you can see in the 5 picture
lot of groves for the top tray and the panels the drawers slide on. this was a hard glue up. (many colorful metaphors ) went into this glue up. did not line the bottoms of the drawers i think to cover the wood just wouldn’t be wright. for being birch ply the drawer bottoms came out nice.
woods are padauk and birds eye maple. finish is wipe on poly about 4 coats
might make a dollar if i sell this one
last picture is of things to come… finally a drum sander to call my very own (hate belt sanding cutting boards)

-- self proclaimed copycat





7 comments so far

View degoose's profile

degoose

7051 posts in 2098 days


#1 posted 01-15-2010 04:30 AM

Super Job..

-- Drink twice... and don't bother to cut... @ lazylarrywoodworks.com.au For lovers of all things timber...

View Kindlingmaker's profile

Kindlingmaker

2654 posts in 2270 days


#2 posted 01-15-2010 04:33 AM

WOW! I really like the Jewery Box! Your craftsmanship is shown well!

-- Never board, always knotty, lots of growth rings

View woodworm's profile

woodworm

14134 posts in 2334 days


#3 posted 01-15-2010 05:03 AM

Wow! beautiful.
I like to see the progress of you drum sander. I can find the electric motor here in my country, but hard to find the arbor/shaft and all other accessories. What is the most suitable RPM of the motor? Do you have info where I can buy most of the hardware?
Thanks.

-- masrol, kuala lumpur, MY.

View newTim's profile

newTim

556 posts in 2350 days


#4 posted 01-15-2010 06:14 AM

Looks good to me too.

-- tim hill www.newcalshop.com

View dorran's profile

dorran

140 posts in 1978 days


#5 posted 01-15-2010 06:46 AM

Great contrast in wood. Let me know when the belt sander is done, I’ll be over.

-- Life is about choices. You can spend a lot of money on furniture and have really nice furniture; Or you can spend a lot on tools and have even more expensive, crappy furniture. I made my choice.

View Jimthecarver's profile

Jimthecarver

1123 posts in 2529 days


#6 posted 01-15-2010 03:58 PM

Great job on the box.
Is that going to be a thickness sander or a V-drum type?

-- Can't never could do anything, to try is to advance.

View eddy's profile

eddy

930 posts in 2108 days


#7 posted 01-15-2010 04:06 PM

woodworm most of the info i got on making the drum sander i got from this blog it was very helpful
http://lumberjocks.com/YorkshireStewart/blog/3640

jim it will be a 24 inch thickness sander ordered the velcro and sandpaper yesterday should have all the other parts at the first part of the week so fare comeing out good i stand on the frame is very solid and is square with in 1/16 of a inch.

-- self proclaimed copycat

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase