LumberJocks

"Time zone" clock

  • Advertise with us
Project by BB1 posted 08-28-2016 01:46 AM 644 views 2 times favorited 7 comments Add to Favorites Watch

Once again a big thank you to the LJ that gave me info on clock mechanisms. This is for our RV and has a clock for each time zone in the continental USA. Had a major oops when I realized the face board was thicker than the clock shafts. I had thought I understood how to install but somehow overlooked the way the mechanism needed to be mounted before the hands are installed. Had to run dados up the back in order to get the thickness correct as I already had the back support bars glued in place. The arrow is movable and will mark our current time zone when traveling. Face front is myrtlewood and then a bit of walnut for the back and the arrow.





7 comments so far

View majuvla's profile

majuvla

11034 posts in 2680 days


#1 posted 08-28-2016 08:51 AM

Nice and simple design. Great idea to have them all on one board. I like it without numbers.

-- Ivan, Croatia, Wooddicted

View BB1's profile

BB1

818 posts in 661 days


#2 posted 08-28-2016 11:45 AM



Nice and simple design. Great idea to have them all on one board. I like it without numbers.

- majuvla


Thanks. Had some discussion on adding numbers or adding some dashes with wood burning, but decided to keep it simple. It will fit between two windows.

View Scott Oldre's profile

Scott Oldre

964 posts in 3244 days


#3 posted 08-28-2016 12:44 PM

great idea. simple,useful and pleasing to look at. thanks for sharing.

-- Scott, Irmo SC

View JPJ's profile

JPJ

814 posts in 2433 days


#4 posted 09-07-2016 04:22 AM

Nice job!

View Jim Jakosh's profile

Jim Jakosh

19589 posts in 2918 days


#5 posted 12-03-2016 10:15 AM

Very unique. Nice work on it!! did you buy the movements from Klockit?

Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View BB1's profile

BB1

818 posts in 661 days


#6 posted 12-03-2016 12:32 PM

Jim – you guessed it. Klockit had a good selection and a friend had a coupon so bought 5 movements so I would have an extra if I messed one of them up. All went ok after I did my “fix” for the wood thickness so I can make another clock at some point.

View Ron Aylor's profile

Ron Aylor

1643 posts in 460 days


#7 posted 12-03-2016 01:55 PM

What a clever idea … great job. The myrtle wood is beautiful. I like the absence of numbers … causes a double take before one realizes it’s a clock!

-- Ron in Lilburn, Georgia.  Knowing how to use a tool is more important than the tool in and of itself.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com