|Project by kosta||posted 01-10-2010 05:12 PM||2142 views||0 times favorited||3 comments|
Yo whats up everybody I built theses napkin holders as christmas presents. If you watched Episode 48 Napkin Holders you saw these. They are made from recycled wood from some old dresser drawers. They are a little under a 1/4 inch thick. I think that any napkin holder that is thicker then a 1/4 doesnt really look right. It took about 3 hours total to build these and they were pretty simple to build. The only problem I had was the roundover because I had a 45 degree miter on the top and it was end grain. There is 3 coats of stain and 1 coat of Polyurethane.
-- kosta Virginia Beach, VA http://www.kostasworkshop.blogspot.com/