LumberJocks

Festool Knife Box

  • Advertise with us
Project by mirock posted 08-06-2016 09:45 PM 1394 views 0 times favorited 13 comments Add to Favorites Watch

Hi woodworkers!

Here is my Festool Knife wooden Box which I have made today.
Let’s criticize it!

Here is the video of the process:

https://youtu.be/ETcT1qcg2AI

-- Dad, husband and everythingmaker





13 comments so far

View NDVermin's profile

NDVermin

103 posts in 2260 days


#1 posted 08-07-2016 02:19 AM

That sucks….. Just kidding! Really nice little box and it looks like the fit of the slide top is great. I have a CNC too, but haven’t had nearly the luck in doing this type of inlay work. Yours turned out great.

-- Scott - https://www.facebook.com/CustomHistoricalDisplays/ and www.customhistoricaldisplays.com

View oldnovice's profile

oldnovice

6098 posts in 3058 days


#2 posted 08-07-2016 04:07 AM

The only criticism I have is that you have it and not me!

That is a very unique process I will have to try that myself.
Thanks for the video too!

-- "I never met a board I didn't like!"

View Lou319's profile

Lou319

15 posts in 2708 days


#3 posted 08-07-2016 11:12 AM

Very nice results! This further supports my desire for a CNC.

View observer100's profile

observer100

324 posts in 800 days


#4 posted 08-07-2016 02:17 PM

Nice project and I enjoyed the video. You made it look easy!

View mirock's profile

mirock

186 posts in 2321 days


#5 posted 08-07-2016 02:41 PM

Thank you my coleagues!!!

-- Dad, husband and everythingmaker

View Gary's profile

Gary

56 posts in 1952 days


#6 posted 08-07-2016 05:55 PM

It is impossible to criticize any of your work, but I found something. Shouldn’t the inside of the box be lined in velvet?

;-)

-- Cheers -- g

View mirock's profile

mirock

186 posts in 2321 days


#7 posted 08-07-2016 07:12 PM



It is impossible to criticize any of your work, but I found something. Shouldn t the inside of the box be lined in velvet?

;-)

- Gary

Yes Gary!) Really I did it everytime. By back side of leather. But here I’ve forgot to count 1.5mm for this and make exact knife thickness size(.

General purpose of this box was to train V-carving CNC inlay and next I was a bit inattentive(((

-- Dad, husband and everythingmaker

View Woodwrecker's profile

Woodwrecker

4040 posts in 3266 days


#8 posted 08-07-2016 08:28 PM

Nicely done my friend.
Is the knife made by the same company that makes the Swiss Army Knife?

Your box came out very nice.

-- Eric, central Florida / Utor praemia operibus duris

View oldnovice's profile

oldnovice

6098 posts in 3058 days


#9 posted 08-08-2016 04:02 AM

Yes, this knife is made by Victorinox one of the Swiss Army Knives manufactures!

Ein taschenmesser!

-- "I never met a board I didn't like!"

View woodbutcherbynight's profile

woodbutcherbynight

3129 posts in 2099 days


#10 posted 08-10-2016 03:13 AM

Nice work, did you make it so it can be clipped to my belt? LOL.

-- Live to tell the stories, they sound better that way.

View mirock's profile

mirock

186 posts in 2321 days


#11 posted 08-14-2016 09:53 PM



Nicely done my friend.
Is the knife made by the same company that makes the Swiss Army Knife?

Your box came out very nice.

- Woodwrecker

Yes but smaller one!

-- Dad, husband and everythingmaker

View mirock's profile

mirock

186 posts in 2321 days


#12 posted 08-14-2016 09:53 PM



Nice work, did you make it so it can be clipped to my belt? LOL.

- woodbutcherbynight

I didn’t think about it) need to try!

-- Dad, husband and everythingmaker

View GR8HUNTER's profile

GR8HUNTER

2227 posts in 402 days


#13 posted 08-15-2016 12:28 AM

you should try and sell them to festool

-- Tony Reinholds,Pa. REMEMBER TO ALWAYS HAVE FUN

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com