Small Clock

  • Advertise with us
Project by redfernal posted 01-06-2010 09:56 PM 1370 views 5 times favorited 6 comments Add to Favorites Watch

I made this clock from maple and wenge to have a night and day look to it. It is 4 1/8 inches high by 2 1/2 inches wide by 1 1/2 inches deep. The upper left cutout is 1 1/2 inch radius, the lower right cutout is 2 1/2 inch radius, and the back pieces are 4 1/8 inch radii, which looked better than a single radius around the back. After finishing with polyurethane, I used the Micro-Mesh sanding system to give it a nice smooth gloss.

6 comments so far

View Jason's profile


658 posts in 2594 days

#1 posted 01-06-2010 11:09 PM

Wow! The radius on the back really makes this in my opinion. Takes it from a clock to a truly three dimensional artwork.

-- Jason - Colorado Springs

View mjpierson's profile


86 posts in 3078 days

#2 posted 01-07-2010 03:23 AM

cool. unique with the curves.

-- Mike - Columbus, Ohio

View Willow's profile


18 posts in 2194 days

#3 posted 01-07-2010 03:49 AM

It looks much bigger in the photo – I thought it was “mantle clock” size – good illusion and good project!

View a1Jim's profile


113815 posts in 2663 days

#4 posted 01-07-2010 04:25 AM

Neat clock

-- Custom furniture

View Lloyd Davies's profile

Lloyd Davies

114 posts in 2411 days

#5 posted 01-09-2010 08:52 AM

Very simple design and unique and attractive. Favorited.

Trying to catch up with a1Jim. 19925 posts to go.


-- Northern California

View Dick, & Barb Cain's profile

Dick, & Barb Cain

8693 posts in 3385 days

#6 posted 01-16-2010 10:43 PM

Beautiful design with the apposing curves.

-- -** You are never to old to set another goal or to dream a new dream ****************** Dick, & Barb Cain, Hibbing, MN.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics