|Project by HoneyDew||posted 07-23-2016 06:18 AM||502 views||3 times favorited||5 comments|
We’re in the process of selling our house and the sign didn’t look very good compared to others around so I decided to make a post and frame to help give some emphasis to the sign.
I put a 4×4 into the ground and then slipped the post over it. The sign is 24” x 18” which I put into the frame and just pressed a piece of trim against it to hold in place. The angle for the top and mid way was 10 degrees. The joints are off a little primarily due to some serious cupping in the original wood.